The Air Oil Separator (AOS) / Catch Can is an important part in an engine and it serves three main purposes, such as to;

• Prevent oil and contaminants from entering the intake system
• Reduce carbon deposits on the intake valves
• Separate the oil vapors, allowing only clean air to return to the intake.

These systems are integral part of the engine as they lead to improved engine performance and efficiency. As a car engine runs, it produces blow-by gases which largely contain oil vapors and contaminated gases. The thing is, if it happens that these gases re-enter the intake system, it can lead to carbon buildup on the intake valves and reduce engine efficiency. This is where the AOS or Catch Can comes in, these products intercepts these contaminants and separates the oil vapors from clean air, and for the case of AOS allowing only clean air to return to the intake.

What are the differences between the Air Oil Separator (AOS) and Catch Can

We have made it clear that these systems share the same function, but you may be wondering what their differences are, a knowledge that may inform your purchasing decisions. The thing is that apart from their names, which are the obviously different, these systems have different designs, maintenance, and cost.

Catch Cans

Catch cans have a simpler design and require a little bit of human interference to manual drain the collected oil and contaminants. Catch cans collects oil vapors and contaminants in a single chamber, and compared to the Air Oil Separator, it does not return the cleaned air to the intake. Their biggest downside is definitely the periodic manual draining required to remove the collected oil and contaminants.

The Air Oil Separator

AOS has a more sophisticated design with multiple chambers and baffles which leads to a more efficient oil separation process. AOS is different from catch cans in that it returns the cleaned air to the intake system, it also requires less frequent maintenance, and it protect the engines long term against carbon buildup in the intake system. The down side of this system maybe it’s cost, as Catch Cans are more budget friendly due to their simple design.

There are many factors to consider when you are deciding which one to buy, things like;

• your budget,
• your vehicle needs,
• the level of maintenance you are comfortable with,
• personal preference and more.

We can’t decide for you, but what we can tell you is that the more efficient option is the AOS, but for car enthusiasts who are looking for a cost-effective solution to address blow-by issues, the most affordable and accessible option is the Catch Can. You decide, and do not hesitate to contact us for questions or if you need more information on products in our shop. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

At Vivid Racing, we love to be your plug for the best advice, recommendations, and car products on the market. We don’t shy away from giving our expert opinion and continue to do so to all car enthusiasts who reach out to us and read our blogs. When it comes to the Toyota GR-86 / Subaru BRZ, we have shared the best coilover suspension upgrades, the most underrated upgrades for the 2.4L Boxer, and more. Today, we are going to share the top 6 exhaust upgrades meant to increase horsepower and torque hence improving performance, enhance throttle response, and provide a more aggressive exhaust note and we have videos to prove this.

So, if you own the 2.4L Boxer, here are the best exhaust upgrades that you should go for. We are sharing 6 of them so that you have more options, and brands to choose from.

1.) VRP 3-Inch Titanium Catback Exhaust

Made by our very own, VR Performance, this is our first recommendation because it is one of the lightest and budget-friendly Titanium Cat-Back options. You know what if a titanium one isn’t what you prefer, just to give you more options, you can save (almost) ALL the money by going for a Stainless Steel Catback Exhaust one. But if you are still reading this, hence interested in knowing more about the Titanium one, you should know that it solves two issues found in the stock exhaust;

• It delivers the glorious rumble that a stock exhaust fails to
• Eliminates the hindering back pressure created by the factory system

With no modification required for installation, the VRP 3-inch Titanium Catback Exhaust Subaru BRZ | Scion FRS | Toyota GT86/GR86 2013+ will unlock the true tone of the 2.4L boxer engine.

2.) MRT Street Race Header Back Exhaust System

We recommend this second option because we know that your engine deserves to be heard. This American-made Street Race Header Back Exhaust System by MRT Engineered Performance will give your car that loud ramble it has been missing. What makes this system special is the fact that it was engineered for the best sound to match your 86 and it also increases performance from increased exhaust flow, on top of it being manufactured using a corrosion-resistant T304 Stainless Steel. If you want to set yourself apart on the road, this is the system to go for.

3.) ARMYTRIX Valvetronic Exhaust System Toyota GR86 2022+ | Subaru BRZ 2.4L Non-OPF

We wouldn’t be recommending the best products on the market if we didn’t mention an exhaust from Armytrix. So our third recommendation for you is the ARMYTRIX Valvetronic Exhaust System Toyota GR86 2022+ | Subaru BRZ 2.4L Non-OPF 2013+. The brand is known for manufacturing quality exhausts with high-end features and their signature sound. Apart from the deep, sporty sound which as seen in the video below, should be enough to convince you to grab this Valvetronic exhaust, this system will also deliver a reduction in weight and an increase in power especially in the low and mid-rev range.

4.) HKS Legamax Sports ZN8 | ZD8 FA24 Toyota GR-86 | Subaru BRZ 2022+

Our fourth option is from a brand that is well-versed with the Toyota GR-86, and we have recommended their products for a full GR86 build before, CLICK HERE to check them out. When it comes to manufacturing high-performance products, HKS never disappoints, matter of fact the HKS Legamax Sports ZN8 | ZD8 FA24 Toyota GR-86 | Subaru BRZ 2022+ (seen in the video below) has us scratching our heads wondering, is this the most refined exhaust option? Here’s why we think so, this system is guaranteed to provide excellent exhaust efficiency as it delivers a sporty sound in the high rpm range, accompanied by a modest sound at the low rpm range all this while having a low back pressure, if that won’t have you wondering the same too, we don’t know what will.

5.) Quicksilver Sport Exhaust System with Sound Architect Toyota GR-86 | Yaris 2020+

Our fifth recommendation is the Quicksilver Sport Exhaust System with Sound Architect Toyota GR-86 | Yaris 2020+ which was manufactured to please all enthusiasts with its bass-heavy presence and rising note under acceleration. The thing that differentiates this system from others in the list, is the fact that you have both sound options, Quiet or Loud – at the touch of a button. The quiet mode provides sound similar to the stock system but the loud mode, the loud mode is the main reason this system made the list, Check out this video below to see what we mean.

Features:

• Significant weight reduction – OE system is 12.9 kgs QuickSilver is 8.9 kgs.
• Easy Installation – Literally ‘Plug & Play’.
• Carbon-Fibre Tips – Black carbon tips to match the roof and other black elements.
• The Sound – A massive improvement see below.

This system fits the GR86, and the Toyota Yaris 2020-2022. Bet you didn’t expect this one… GR Yaris has entered the conversation and has some authority at this table. Keep in mind, that the GR Yaris is equipped with a 1.6L turbocharged three-cylinder motor (G16E-GTS), similar to the stateside GR Corolla. The flat-four Boxer engine (FA20) will output a very different sound, but this video will give you an idea of the luxury quality standards being produced by the Quicksilver brand.

6.) Tomei Exprem Ti Full Type-D Titanium Muffler Kit

Would this be a proper buyer guide if Tomei didn’t have a seat at the table? Here’s how they earned it. Manufactured by Tomei, this system was made with overall engine performance gains in mind. When it comes to its design, every tube’s length and size were carefully crafted to maximize torque, response, and exhaust flow efficiency from start to finish. Manufactured using the best Titanium grade materials, this high-quality system is also light, hence causing a weight reduction. When it comes to manufacturing the Exprem Ti system, the brand pt to use their knowledge, and decades-long of experience to make sure that they deliver unrivled system for your GR86.

Manufactured by Armytrix, an aftermarket brand that is dedicated to bringing the finest exhaust upgrade to fit your Nissan Z, this system adds performance gains and brings out that signature aggressive sound that Armytrix systems are known for. In addition to that, the system is engineered to shed unnecessary weight from Nissan Z’s stock system. The system has race mode (valves opened), and valves closed mode, and you won’t need to change the modes all the time, you can just set your own timing for valves to automatically open and close by engine rpm and how deep you press the gas pedal.

The thing that sets this system apart from competitors is the “Throttle Pedal Sensor and Engine RPM Signal Auto Functions” which gives car owners a better launch-start without losing back pressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase airflow for better performance (hp & torque gained) and sound. This performance exhaust system delivers more power, especially in the low and mid rev range, while at the same time neutralizing the annoying frequencies in the most critical rpm range. Check out the video below to see the Nissan Z’s revolution after we installed the system

Kit Includes:

• Race Y-Pipe (NIZ40-F)
• Mid-Pipe (NIZ40-M)
• Valvetronic Muffler (NIZ40-VM)
• Wireless Remote Control Kit (OWRC)
• Dual Blue Coated Tips (2xS13B)

Check out the links below to get all Armytrix exhaust options for the Nissan Z:

• CLICK HERE to buy the ARMYTRIX High-Flow Performance Race Pipe w/Cat-simulator Nissan Z 3.0L Twin-Turbo 2023+
• CLICK HERE to buy the ARMYTRIX High-Flow Performance Secondary Race Downpipe Nissan Z 3.0L Twin-Turbo 2023+
• CLICK HERE to buy the ARMYTRIX Ceramic Coated High-Flow Performance Race Pipe w/Cat-simulator Nissan Z 3.0L Twin-Turbo 2023+
• CLICK HERE to buy the ARMYTRIX Ceramic Coated Sport Version High-Flow Cat-Pipe w/200 CPSI Catalytic Converters Nissan Z 3.0L Twin-Turbo 2023+

• CLICK HERE to buy the ARMYTRIX Stainless Steel Valvetronic Exhaust System Nissan Z 3.0L Twin-Turbo 2023
• CLICK HERE to buy the ARMYTRIX Sport Version High-Flow Cat-Pipe w/200 CPSI Catalytic Converters Nissan Z 3.0L Twin-Turbo 2023+

If you have any questions, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

With their 3rd generation Tundra, Toyota is once again showing that they are committed to delivering vehicles with exceptional power, efficiency, and capabilities. This modern full-sized pickup is their toughest yet, and their most durable, and reliable, and on top of that it has impressive features and a comfortable interior ready to give you an unforgettable street driving experience and off-road adventures. We know how much personalizing your ride with aftermarket parts means to a car enthusiast like you, and so we have 6 top best mods for your Toyota Tundra ’22+ to help you add a personal touch that will make that beast truly your own.

1.) Cold Air Intake

A cold air intake upgrade for your Toyota Tundra is the first mod we recommend for obvious reasons. A cold air intake upgrade will increase airflow to the engine which will translate into improved efficiency, performance, horsepower, and torque. A cold air intake can also give your ride an aggressive sound, making it sound sportier. We recommend the aFe Momentum GT Red Edition Cold Air Intake System w/ Pro DRY S Filters Toyota Tundra V6-3.4L 2022-2023 as it is best suited for both street and light off-road use.

Features:

• Dyno-Proven Gains up to +13 HP and +17 Lbs. x Ft. TQ
• Outflows Factory Intake by 11%
• Measured Flow: 495 CFM @ 7″ H20
• Washable and Reusable Pro DRY S Air Filters for Maximum Convenience
• Innovative Filter-to-Housing Interface for
• Easy Installation
• Large Clear Sight Windows for Convenient
• Filter Inspection Without Disassembly
• Easy installation using factory mounting location
• Premium Clamps and Silicone Couplings
• Provide a Secure Seal and Excellent Durability

2.) Exhaust System

An exhaust upgrade has a way of bringing out the best out of a ride, it’s no wonder it’s one of the most sought-after mods. For your Toyota Tundra, we recommend the MagnaFlow Overland Series Cat-Back Performance Exhaust System Toyota Tundra 2022. This system is durable and can stand anything in your adventures as it has elevated ground clearance and superior departure angles which gives it an added advantage compared to the stock exhaust. In addition to that it gives you more options when it comes to the sound heard from your ride as the system was engineered with NDT (No Drone Technology) resonators which keep droning noises in check using quarter-wave passive noise cancellation.  This means you will get appropriate sound for the trail as well as when you are on the highway.

Features:

• 3″ diameter
• Mandrel-bent main tubing that flows through a fast-flowing
• Straight through 5″x11″x22″ offset/offset same-side muffler with an internal branch pipe
• All with a premium brushed finish
• This Toyota Tundra performance exhaust system is made of durable
• Corrosion-resistant stainless steel and produced using advanced
• CNC precision robotic manufacturing techniques
• Limited lifetime warranty

3.) Tuning Box

We recommend the VR Tuned ECU Tuning Box Kit V2 Toyota Tundra i-Force 3.5L Twin-Turbo V6 389hp 2022+ for the power to fine-tune your car’s performance to your preferences. In addition to that a tuning kit will also provide the following benefits to your Tundra;

• Boosting of engine’s performance
• Enhanced throttle response
• Better fuel efficiency

In addition to those benefits, the VR Tuned ECU Tuning Box Kit will give your Tundra an additional 60hp and 75ft-lbs, it is a plug-and-play solution so it will not affect your warranty in any way.

Horsepower Ratings:

• +60whp (73bhp)
• +75wtrq (91ft-lbs )

0-60mph Testing:

• Stock – 7.44 seconds
• Tuned – 6.55 Seconds
• Testing completed with 37″ tires

4.) Leveling Kit

A leveling kit is one of the important upgrades for pick-up trucks, and for your Tundra we recommend the ICON Vehicle Dynamics Stage 4 complete suspension system. This system offers improved on- and off-road performance as well as improved alignment specs and increased front-end lift height range for a proper stance and fitment of up to 35″ tires. The system allows for up to a 40% increase in front wheel travel over stock, and on top of that it’s a bolt-on kit so no welding or cutting is needed for it to be installed

Features:

• Vehicle-specific design for 2022-2023 Toyota Tundra
• 2.5 Series front coilovers with internal reservoirs for superior damping and vehicle control
• Adjustable front ride heights from 1.25-3.5″ of front lift over stock when used with included billet UCAs
• Billet aluminum UCAs for added strength, durability, and on-vehicle caster/camber adjustment for optimum drivability
• UCAs feature the patented (U.S. Pat. 10,731,700) Delta Joint Pro with 90 degrees of total articulation
• Included sway bar drop brackets reduce bind in OE sway bar links
• Allows for up to 40% increase in front wheel travel over stock without overstressing OE components
• 2.0 Aluminum Series rear shocks provide a balanced tune with coilovers and increased performance
• All ICON shock absorbers are fully rebuildable and re-tunable
• 100% Bolt-on system – no drilling, cutting, or welding necessary to install

5.) Wheels

Nothing says styles and individuality like a wheel upgrade, and we recommend the Volk Racing TE37XT, which is rigid, has reduced weight and is elegant. These lightweight wheels complement your car’s look and give you that exceptionally relaxing ride on the highway. They feature a one-piece, forged structure and they are long-lasting their brave nature makes them suitable for off-road applications.

Features:

• Wheel Size: 16″, 17″, 18″
• Finish: Blast Black | Bronze | Matte Red
• Configuration: 5×127 | 5×150 | 6×135 | 6×139.7
• RAYS original test: Clears JWL & JWL-T standards
• Included: European Aluminium Air Valve (RAYS new logo)(BK)
• Covered with a wear-resistant finish
• Provides impeccable strength and lightweight to easy handling and accurate power
• Durable and compact design

Even though we recommend the Volk Racing TE37XT, we don’t want to limit your options, CLICK HERE to check out wheels for your Toyota Tundra that come in different sizes, and finishes and are made by different brands.

6.) Tires

To make the most out of your on-road and off-road adventures, one needs aggressive tires that can do the job well. We recommend the Toyo Tire Open Country M/T 35 X12.50R18 LT 123Q E2 BSW only if you decide to opt for an 18×9 with offset around +19. We love the look of a 35″ x 12.5″ M/T tire and it has an aggressive mud terrain tread design that delivers maximum off-road traction in any terrain with great on-road performance. This tire is durable and ready to deliver the best performance and traction in deep mud and snow making your adventures more enjoyable and unforgettable.

7.) Light Bar

A light bar will help you make the most of your off-road experience. With a light bar, you will have improved visibility in low-light conditions, such as fog, rain, or snow, hence assuring your safety when navigating challenging terrain during nighttime or in areas with poor lighting. The Baja Designs S8 20 Inch Behind The Bumper Light Kit – Amber Toyota Tundra 2022+ will also improve the aesthetics by adding a rugged and sporty appearance, and the performance of your ride in your adventures. This kit is inexpensive and easy to install and is designed to mount cleanly to your vehicle.

Kit Includes:

• (1) 20” S8 Clear or Amber Driving/Combo Light Bar
• (2) Mounting Brackets
• (1) Wiring Harness
• (1) S8, Backlit Add-On
• All necessary hardware

If you have any questions about the 22+ Toyota Tundra’s upgrades or if you need new products for your 22+, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com

Mercedes AMG G-Wagon G63 is an off-road high-performance SUV with an attractive and luxurious interior, impressive power, and unique features. Even though the G-Wagon is a beast on the road, this ride can still benefit from a performance exhaust upgrade. As seen in the video below, the ride stands to benefit from an aftermarket exhaust upgrade in several ways including;

• Sound – An exhaust upgrade especially the Akrapovic Evolution Line Titanium Catback Exhaust System which we highly recommend for your G-Wagon will bring out the aggressive and distinctive tones from your ride
• Performance – Upgrading to the Akrapovic Evolution Line Titanium Catback Exhaust System can lead to improved performance. Aftermarket exhaust systems are often designed to reduce backpressure and increase the flow of exhaust gases which can result in improved horsepower and torque, allowing the vehicle to accelerate more quickly and feel more responsive.
• Exhaust Gas Flow – This exhaust system was designed with larger-diameter piping and less restrictive mufflers, which means improvement in the flow of exhaust gases from the engine, which can lead to more efficient combustion and potentially better fuel efficiency.
• Personalization – Exhaust upgrades give you that power and option to personalize your ride, this exhaust has an open valve and a closed valve giving you the choice on different occasions. Personalizing your AMG G63 allows you to stand out from the crowd, and showcase individuality.
• Reduced Weight – Since this system is made from titanium which is a lighter material, it is 45% lighter than the stock system, while being very durable. This reduction in weight has a positive impact on the vehicle’s overall weight distribution and handling.

We recommend the Akrapovic Evolution Line Titanium Catback Exhaust System for your Mercedes-AMG G 500 because this system was designed with durability in mind and its tailpipes complement the car’s robust look, and they are perfectly routed to fit within limited space. This system was manufactured by a Slovenian brand that has more than 20 years of exhaust systems manufacturing experience, and it is guaranteed to deliver a unique sound that is distinctly deeper and sportier, especially during acceleration and shifting. With this system, power and torque levels are also increased through the entire rpm range.

Features:

• The new Akrapovic Sound Kit – enables the driver to easily adjust the sound of the exhaust wirelessly while driving. Combining state-of-the-art exhaust system technologies with the latest innovations ensures a premium driving experience with an instantly recognizable Akrapovic sound.
• The user can switch between regular and sporty modes at the simple touch of a button on the Sound remote Controller or the Akrapovic Sound Kit Car App, and take an active role in creating an extraordinary sound experience.
• Max. Power
  -kW – 439.6 / 5900 rpm | +8.1 / 4500 rpm
  -HP (m) – 597.7 / 5900 rpm | +11 / 4500 rpm
  -HP (i) – 589.6 / 5900 rpm | +10.8 / 4500 rpm
• Max. Torque
  -Nm – 890.8 / 3750 rpm | +19 / 4000 rpm
  -lb-ft – 657 / 3750 rpm | +14 / 4000 rpm
• Weight
  -lb – 27.3 / -21.8
• Installation Time: 240 mins

Fitment:

• Mercedes-Benz G63 AMG 2019-Present

Note:

• For mounting Akrapovic exhaust S-ME/TI/5 on Mercedes G500/G550, the car has to be equipped with a Mercedes stainless steel package (code PA3) or step boards on the left and right sides (code T84 or T86 or T87).

Additional Original Mercedes parts have to be bought:

• A 901 492 00 44 -> 4 pieces
• A 463 490 05 02 -> 1 piece
• A 463 490 06 02 -> 1 piece

If you have any questions about exhaust systems or if you need new exhaust for your Mercedes AMG G-Wagon G63, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

This past few weeks we have been sharing highly recommended mods for some of the 2022-2023 car models, including the Toyota Tundra ’22+, ’22+ Subaru WRX, Nissan Z ’23+, and Mercedes AMG G-Wagon G63. We at Vivid Racing are committed to ensuring that car enthusiasts are well informed on the best products and services for their cars. And in today’s blog we would like to share the top 7 best mods for the 2023 Honda Civic Type-R FL5.

The Honda Civic Type-R FL5 is a fun-to-drive sport compact with built-in practicality and smooth styling. This new ride redefines what a racecar means through its unleashed performance and by giving its car enthusiast a thrilling driving experience. Even though this ride is impressive, we know it needs your personal touch and some few upgrades, and here are some best mods for it;

1.) Wheels

A wheel upgrade is the best way to add a personal touch to your ride. In addition to that a wheel upgrades will revolutionize your car’s aesthetics, ride comfort, enhance handling and more. We recommend the Volk Racing TE37 Saga S-plus Wheel Set of 4 Honda Civic FK8 | FL5 Type-R 18×9.5 5×120 45mm Diamond Dark Gunmetal that is available in our shop as they are manufactured by Ray’s Engineering, a brand with a reputation for manufacturing high-quality, lightweight wheels since the 1970s.

• CLICK HERE to buy the Volk Racing TE37 Saga S-plus Wheel Set of 4 Honda Civic FK8 | FL5 Type-R 18×9.5 5×120 45mm Diamond Dark Gunmetal
• CLICK HERE to buy the Volk Racing TE37 Saga S-plus Wheel 18×9.5 5×120 45mm Diamond Dark Gunmetal

2.) Coilovers

The second best upgrade for your FL5 is a touring sport damper by Revel which is guaranteed to give your car several performance and handling effects including;

• Increased traction and handling
• Ride height adjustability
• Improved ride comfort and car response

Once installed, the Touring Sports Damper will offer you a sporty yet comfortable ride that will enhance your driving experience to new heights. The fully threaded monotube damper gives you ride height adjustability, and 32 levels of dampening adjustment will allow for fine-tuning of the ride characteristics.

3.) Exhaust (Touring Edition)

The truth is 2023 Honda FL5 Civic Type R could really use an exhaust upgrade, it would be a game changer to not only performance but also the sound of the vehicle. AWE Tuning is a brand known for it’s manufacturing of high-quality exhausts, and they have released a touring edition and a track edition for the FL5.

The touring edition features a patented drone canceling 180 technology, it also features a 3” inlet complete with an adapter to accommodate the factory downpipe perfectly while leaving an open 3” connection. The touring edition enables a deep, hearty tone both down low and up high no matter the transmission, and you can rest assured that there will be no tone change because the internals will not break down due to the design and construction of 180 technology resonators. Also the touring edition will add dyno-proven max gains of 14 hp and 13 ft-lbs of torque at the wheels (stock downpipe)

3.1) Exhaust (Track Edition)

If you would love to go for the Track Edition, you should know that it retains all of the precision engineering from the touring edition, minus AWE’s drone-canceling 180 technology resonator. If you prefer to crank it to 11 without turning it down, this is the right choice for you. This edition is known for offering deep rumble with minimal filter, both in and out of the cabin, at all speeds (including highway cruising). Also, just like the touring edition, the track edition has will add dyno-proven max gains of 14 hp and 13 ft-lbs of torque at the wheels (stock downpipe)

4.) Intercooler

With the manufacturing of PRL Motorsports Billet Intercooler Upgrade Silver Honda Civic Type-R FL5 2023+, PRL aimed at solving the heat soak problem found in stock intercoolers. Excessive heat-soak increases the risk of detonation and causes major power-loss due to high charge air and cylinder temperatures. So, the PRL Motorsports intercooler upgrade decreases charge air temperatures while increasing potential airflow by increases surface area by 31% and internal flow to allow optimal cooling and airflow. The PRL has the best features that will improve the performance and allow for the adequate cooling for your FL5.

Features:

• Constructed from high-quality materials
• Major mid-range power gains
• Increased efficiency and consistency in power delivery
• Increased engine safety

Kit Includes:

• 1 – Intercooler Assembly
• 1 – Cardboard Stencil w/ “PRL” Logo
• 2 – Buna O-Ring

5.) Brake Kit

When it comes to a braking upgrade, we recommend the EBC Brakes Front S26 Kits Yellowstuff & SG2F Rotors Honda Civic Type R 2.0 Turbo Petrol 2017-2023. This is the best braking upgrade for your FL5 as it has a high cold friction level, boasts excellent pedal ‘feel’ and exhibits superior fade resistance compared to OEM parts. With this brake kit you will achieve high level of performance since the Yellowstuff pads offer a depth of precision and control most other brake pads could only dream of. Found in our shop right now, this is the best kit for a high powered vehicle like the FL5, and the kit is at home on the road or at the race track.

Features:

• Pair of fully-floating 2-piece brake discs
• One set of high performance Yellowstuff brake pads
• “Thermic black” anti rust coating
• Direct fit, no changes required over stock set up
• 10,000 mile 12 month no hassle warranty

Kit Components:

• Yellowstuff Pads: DP41210R
• 2 Piece Floating Rotors: SG2FC2028

6.) Aerodynamic Kit

The aerodynamic kit is the best upgrade for your FL5, as it not only improves your car’s aerodynamics and performance but it also enhances your car’s visual appeal. We recommend the APR Performance Aerodynamic Kit Honda Civic Type R 2023 because it combines all the best aerodynamic upgrades into a single package. This package is designed to improve high-speed handling, both on and off the track.

Kit Includes:

• Front Air Dam
• Side Rocker Extensions
• Rear Bumper Skirts

7.) Adjustable Wing

The last mod we recommend for your FL5 will be a game changer to your car’s aerodynamics and handling. An adjustable wing, especially the APR Performance GT-300 67 Inch Adjustable Wing Honda Civic Type R 2023 will help you find a balance between downforce and drag, improve aesthetics, and track performance, enhanced cornering and provide stability at high speeds driving. Click the blue button below to grab it right now!!

If you have any questions, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

If you own Ford Bronco we know that off-roading is the language you passionately speak, and what other way to take your off-roading adventure to the next level than leveling, and lift kit modifications? As far as we know, none. Leveling and lift kit modifications are a great way to raise your vehicle off the ground with leveling kit resulting in that tall stance that matches up to the back end hence ‘leveling’ the front end with the rear end, while lift kits raise your ride height, and hence providing your vehicle with a much taller ground clearance. If you are looking for leveling and lift kits, we have the top 5 best options that we recommend for your Ford Bronco, check them down below!

1. EVO Manufacturing Enforcer w/ 2.5 linch King Coilover Shocks

Available in our shop for $6,912, this is the latest kit to be released by EVO Manufacturing. Designed to deliver a new level of versatility and performance, these coil overs are factory tuned for optimal ride quality. This product promises unmatched performance and durability while elevating your driving experience. The kit is built from the same quality materials and to the same precise tolerances as the brand’s top-of-the-line pure race series shocks, so you should expect nothing but the best performance in your adventures. You should know that the kit is fully rebuildable, serviceable, and tunable.

Features:

• Perfect for Ford Bronco models from 2021 to 2023.
• Provides a lift of 2-2.5 inches, enhancing your vehicle’s stance and off-road capabilities.
• Incorporates the renowned King Coilover Shocks for a smooth and controlled ride.
• Large 2.5″ diameter shock bodies increase fluid capacity for smoother, cooler running shocks.
• Increased wheel travel
• Adjustable Ride Height
• Fits 35″ Tires
• Factory Tuned for optimal ride quality
• King’s monotube design uses a full-diameter piston and standard, full-size valving
• It’s built from the same quality materials and to the same precise tolerances as King’s top-of-the-line pure race series shocks
• Extensive dynamometer lab testing and punishing real-world testing to develop the optimal damping curves and spring rates for your bronco.
• Fully rebuildable, serviceable, and tunable.

2. ReadyLift Suspension 1.25″ Leveling Kit

Made to fit the 2021-2022 Ford Bronco, this leveling kit was designed by ReadyLIFT Suspension which is an aftermarket company that was founded in 2006. The company specializes in creating a suspension leveling system that allows its users to control the height of their vehicles, and this leveling kit for your Ford Bronco is guaranteed to improve the overall look and ride quality of the Bronco. This leveling kit will increase your Bronco’s ground clearance, create a more aggressive appearance stance, and allows you to upgrade to a larger wheel and tire package.

This is a perfect bolt-on leveling kit for the Bronco that works with or without the factory Sasquatch package lift kit. This new leveling kit consists of two CNC-machined aircraft-grade billets Aluminum top mount strut extensions and two lower strut extensions to achieve the perfect 1.25″ front lift for a nice level stance that adds some muscle to the Bronco’s appearance. The leveling kit spacers in the 66-21100 1.25″ leveling kit are designed to achieve maximum height without creating ball joint or tie rod bind when the suspension is cycling through the entire range of travel.

Tire Fitment:

• 315/70R with stock 17″ Sasquatch Package
• 285/70 with stock 17″ Non-Sasquatch
• MAX WITH TRIMMING – Tire: 35″ x 12.5″ Wheel: 9″ wide +18 offset

Kit Includes:

• 2 front strut top spacers
• 2 front strut bottom spacers
• Hardware Pack

Features:

• Aircraft-grade CNC-machined billet Aluminum construction
• Bolt-on installation-no modifications or cutting required.
• Achieves maximum lift height without creating tie rod or ball joint bind during suspension cycling.
• Increases ground clearance.
• Allows for 315/70R-17 for Bronco with the Sasquatch package.
• Allows for 285/70R-17 tires for all non-Sasquatch packages.
• Can allow for up to 35×12.50 on a 9″ wide wheel with +18 offset with trimming/clearance modifications.
• Estimated Installation Time: 2.5 Hours +/- 0.5 hours excluding alignment and wheel/tire assembly

Fitment:

• Ford Bronco 2021-2022

3. Camburg Billet UCA Fox 2.5 Performance Elite Kit

If you want the best in performance and style for your new Ford Bronco, the FOX 2.5 DSC coilover kits are the way to go. This Camburg FOX 2.5 Performance Elite DSC Series kit is the ultimate mid-travel suspension system for your Ford Bronco utilizing FOX’s 2.5 series of shocks and their uni-ball upper arms. These give you the ability to lift and vastly improve the ride quality both on and off-road. Each coilover is designed to gain maximum wheel travel with an aftermarket upper arm all while keeping CV joints, tie rods, uni-balls, and ball joints in their working ranges.

Front:

• 2-door: w/ Sasquatch Package = 2-3″ lift | w/o Sasquatch Package = 3.5-4.5″ lift
• 4-door: w/ Sasquatch Package = 2.5-3.5″ lift | w/o Sasquatch Package = 3-4″ lift

Rear:

• 2-door: w/ Sasquatch Package = 2.5-3.5″ lift | w/o Sasquatch Package = 3.5-4.5″ lift
• 4-door: w/ Sasquatch Package = 2-3″ lift | w/o Sasquatch Package = 3-4″ lift

Kit includes:

• FOX 2.5 Performance Elite DSC Remote Front Coilovers (2-door 883-06-209 | 4-door 883-06-212)
• Camburg Upper Arms (Options: Billet CAM-110214 | Uniball w/ Covers CAM-110213)
• FOX 2.5 Performance Elite DSC Remote Rear Coilovers (2-door 883-06-210 | 4-door 883-06-213)

Features:

• Corrected geometry with upper arms
• 20% increased wheel travel
• Rear coilover conversion
• Improved handling on & off-road

Fitment:

• Ford Bronco 4-door 2021-2022

4. Daystar 1″ Leveling Kit Front Badlands Ford Bronco Sasquatch 2021+

Manufactured by Daystar, this leveling kit will raise your 2021+ Ford Bronco 1 inch in the front, giving your Bronco a smooth and level ride. Proudly made in the USA, the Daystar Comfort Ride Lift Kits eliminate the nose-down look and can allow for slightly larger tires. This kit was designed to fit 2021+ Ford Bronco Badlands/Sasquatch models.

Features:

• 1″ Front Level
• Maintains a factory ride.
• Made from high-quality 6061 Aluminum Alloy
• No strut disassembly is required.

Fitment:

• Ford Bronco Badlands 2021+
• Ford Bronco Sasquatch 2021+

5. Icon Vehicle Dynamics 21-UP BRONCO NON-SASQUATCH 3-4″ LIFT STAGE 8 SUSPENSION SYSTEM BILLET Ford Bronco Front and Rear 2021-2022

The ICON Vehicle Dynamics Stage 8 Suspension System for the 2021-UP Ford Bronco features their precision-manufactured, custom-valved remote reservoir coilover shocks with CDEV to yield the maximum travel possible along with superior ride quality and suspension performance both on and off-road. This suspension system is designed to provide up to 11.5″ of front suspension travel and 14″ of rear suspension travel when used with 35X12.50 tires. It may be safely used with 37″ and larger tires if using the optional up-travel limiters (which are sold separately). These coilovers also allow for the adjustment of ride height to yield 3-4 of front lift and 2-3 of rear lift over stock 4-door Broncos without the Sasquatch Package. Remote reservoirs greatly increase shock oil volume and heat dissipation surface area to resist overheating and cavitation under hard use, which can lead to damper fade, ensuring sustained shock performance at speed through rough terrain.

Features

• Bushings Included: Yes
• Maximum Lift: 4
• Recommended Aftermarket Wheels: ICON Alloys | 17×8.5″ w/ 5.75 Backspace / 25mm Offset
• Shocks Included: Yes
• Spring Color: Black
• Spring Material: Steel

Kit Includes:

• QTY 1: 21-Up Bronco Front 2.5 Vs Rr Cdev Coilover Kit
• QTY 1: 21-Up Bronco Billet Uca Dj Pro Kit
• QTY 1: 21-Up Bronco Billet Rear Upper Link Kit
• QTY 1: 21-Up Bronco Billet Rear Lower Link Kit
• QTY 1: 21-Up Bronco Rear Adj Track Bar Kit
• QTY 1: 21-Up Bronco Iic Install Kit
• QTY 1: 21-Up Bronco Rear 2.5 Vs Rr Cdev Coilover KitFront 2.5 Vs Rr Cdev Coilover Kit

6. Old Man Emu Suspension Kit for Heavy Front/Heavy Rear Loads Ford Bronco 2021-2022

Established back in 1975, Old Man Emu is an Australian aftermarket company that specializes in creating off-road parts and accessories for most vehicles. Old Man Emu suspension systems are designed to enhance ride quality, ride control, load-carrying capacity, and ride height. This suspension system was designed for heavy load configurations and is meant to be used with the OEM-supplied sway bar. The system guarantees maximum comfort and an enjoyable ride to all off-roaders.

Features:

• Color: Black; Yellow
• Fitment Info 1: Heavy Front/Heavy Rear Loads with a Front Bumper and Winch, and up to 660 lbs Added Constant Rear Weight
• Lift Height: Approximately 2.0 inches; or approximately 0.75 inches for models with Sasquatch trim
• Material: Steel
• Old Man Emu – BRONHK3 – Suspension Kit for Heavy Front/Heavy Rear Loads

Car modifications are the easiest ways for car enthusiasts to personalize their rides’ performance and appearance. However, there’s always one fear in their minds, car warranty. The fear is valid as it is necessary to make car modifications that won’t void your warranty, for reasons such as the resale value, maintaining warranty coverage in case of anything, legal implications, and more. But what if we told you that we have warranty-friendly modifications for your ride? You heard that right, various car modifications won’t void your warranty, and in this blog, we are going to share the top 7 warranty-friendly modifications for ’22+ Subaru WRX owners.

1. Michelin Pilot Super Sport Tires

Wheels and tire upgrades are some of the most warranty-friendly upgrades a car owner can do, so it is no surprise that we are recommending them first. We recommend tires by Michelin for your Subaru WRX, the Pilot Super Sport tire. We recommend the tire for 3 reasons;

• The tire delivers excellent traction in dry and wet conditions
• This tire is great at extreme handling
• The tire has outstanding performance capabilities

When you buy this high-performance tire, you will always be track ready and are guaranteed thrilling performance.

2. AMS Performance Mud Flaps

We wouldn’t be recommending good modifications for you if we didn’t recommend things that would protect your ride from road debris and rust. Mud flaps are a great upgrade, especially if you want to take your ride to off-road adventures, mud flaps can be particularly useful in protecting the Subaru WRX from debris and mud when traversing rough terrain and challenging environments. This mud flap kit by AMS Performance is made with high-quality materials, and designed to withstand the toughest road conditions and keep your WRX looking great! WRX + Mud Flaps = RALLY CAR!

Features:

• Reduces dings, dents, rock chips, and other paint damage from road debris
• Constructed of matte finish abs plastic
• The dark grey color matches OEM fenders perfectly
• Laser cut 6061 aluminum AMS logo
• Mounts in OEM bolt holes with no cutting, trimming, or drilling required

3. License Plate Relocation Kit

The front license plates on your 2022+ Subaru WRX cause a couple of problems;

• creates wind resistance
• blocks critical airflow to your radiator
• and it partially blocks the lower grill
• forces you to drill holes in your front bumper

This is why the Mishimoto License Plate Relocation Kit comes in, to solve these problems. Designed specifically for the 2022+ Subaru WRX, this License Plate Relocation Kit is fabricated from high-strength, anodized, and powder-coated 6061 aluminum. Its installation is seamless, and moving the plate to the side and angling to follow the body lines helps reduce wind resistance and free up space in the center to allow critical airflow to reach your radiator. On top of that, it looks better.

Features:

• Direct fit for 2022+ Subaru WRX
• Installs in under 15 minutes
• Avoids the need to drill holes in your front bumper
• Mounts to OEM front tow hook with no permanent modifications required
• Includes all necessary hardware for installation including stainless-steel license plate screws
• Fabricated from high-strength 6061 aluminum
• Angled to follow the contours of the bumper and reduce wind resistance
• Anodized black shaft and powder-coated black plate bracket for a durable, corrosion-resistant finish
• Allows full airflow to radiator and FMIC
• Mishimoto Lifetime Warranty

Kit Includes:

• (1) License plate mounting bracket
• (1) Front tow hook mounting shaft
• All required hardware for installation & mounting license plate
• Mishimoto Lifetime Warranty

4. Front Racing Tow Hook

When you take your 2022+ Subaru WRX to the track, it is very important to be equipped with the right tools. Mud flaps are essential but so is the racing tow hook. Designed by Mishimoto, this tow hook was designed with both function and style in mind. Available in 6 vibrant color options, and powder coated for maximum durability has the right features that make it meet or exceed requirements for racing series such as SCCA, NASA, and CCA.

Features:

• Direct fit for 2022+ Subaru WRX
• Constructed from high-strength 7075 aluminum and 304 stainless steel
• 8,000-pound straight-pull strength rating
• Designed to meet or exceed SCCA, NASA, CCA, and most racing series regulations
• Fold-down ring with 2-inch/51mm inside-diameter
• Available in Black, Blue, Gold, Neon Yellow, Polished, and Red
• Powder-coated for maximum durability and corrosion resistance
• Includes tow hook location arrow stickers
• Easy to install with no cutting, welding, or drilling required
• Mounts in place of factory front tow hook
• Mishimoto Lifetime Warranty

Kit Includes:

• (1) Mishimoto Racing Tow Hook
• Drilling Template
• Tow Hook Location Arrow Stickers
• Mishimoto Lifetime Warranty

5. Rear Brake Light

The SMY Performance F1 V2 Hyperflash Ruby Red Rear Brake Light Subaru WRX 2022+ comes with extremely bright 15 Red LEDs for an affordable price of $94.50. This Subaru WRX 2022+ brake light is very bright and one of the brightest in the market so you should expect a high-end product once you purchase it. In addition to that, SMY’s new design increases the hyper-flash from 10 blinks to 15 blinks which will help to increase the visibility of your car.

Modes:

• Mode 1 = Hyper Flash Brake Light – Hyper-Blinks 15 Times
• Mode 2 = Steady Brake Light – No Flashing
• Note: Modes can be switched from the driver seat using the brake pedal and headlight switch toggle.

Features:

• 100% Fully Plug Play no slicing required
• Center 8 LEDs if the F1 hyper flashing light. 15 blinks each time the brake pedal is pressed
• DRL Function.
• 2 Modes easily switched from driver seat (NEW 1st to market)
• Wire Loom
• High-End plugs to make installation a breeze

Kit Includes:

• F1 Rear Brake Light
• OEM Subaru Mounting Bracket
• Mounting Hardware
• PNP harness
• Installation Instructions

If you would like to see more SMY lights in order to choose the one that meets your preferences for your Subaru WRX 2022+, CLICK HERE to see the catalog.

6. Front Bumper Canards

Since we are on the subject of aerodynamics, we also recommend these Front Bumper Canards as they are perfect when it comes to aerodynamically tuning the handling for the front of a car. If you would love to enjoy your track days with your Subaru WRX, then this upgrade is a must-have as it is vital for racing and high-performance applications. Made of lightweight and durable carbon composites, APR Front Bumper Canards help increase front downforce at high speeds, and in turn, the added downforce stabilizes the car’s chassis during hard cornering and increases traction for faster lap times.

Features:

• Carbon Fiber Construction
• These APR Front Bumper Canards are made using pre-pregnated carbon fiber manufacturing processes, for high strength and low weight.
• UV Resistant Coating
• Each APR Front Bumper Canard is made with UV-stable epoxy and clear-coat materials for resistance against fading.
• Mounting Hardware Included
• Screws, nuts, and bolts are all included to allow you to install the APR Front Bumper Canards to your car

7. Bracket For Dual Hella Horns

The last modification for your 22+ Subaru WRX that won’t void your warranty is Perrin Performance Bracket For Dual Hella Horns Subaru WRX 2008-2022. Compared to their competitors’ universal parts, Perrin Performance designed these brackets as a perfect fit for your specific model of WRx/STI. Designed to withstand all climates and not fatigue over the lifespan of the product, these brackets are stronger and more rigid, and guaranteed to provide a secure mounting for horn assemblies and in turn better sound projection and visibility. Plus, they flat out just look RAD!

Features:

• CNC Formed 304 Stainless Steel Construction
• Black Powdercoated Finish
• Multiple Mounting Points
• Attaches to Radiator Support
• 5-Year Limited Warranty

And just like that, BMW did it again, extremely better this time. This pure combustion M car, rumored to be the last from BMW, is both sporty and luxurious with an attractive interior and features that strike a chord. Just like other models in the M series, the M2 is also a high-performance and capable car, but this coupé is set apart with 453 horsepower and 406 lb-ft of torque. We know that car enthusiasts are always excited to add a personal touch to their rides for aesthetics and to get more performance, so we compiled these top 5 modifications in this blog for owners of the BMW M2 G87. Keep reading to see the upgrades that others are getting, and why we recommend them.

1. EBC Brakes 2pc Fully Floating Front & Rear Brake Disc BMW M2 G87 460bhp 2023+

Fully floating brake discs are great upgrades for high-performance cars like BMW M2 G87 as they are;

• durable,
• allow for better heat dissipation,
• improve performance,
• and reduce brake fade.

We recommend you get the EBC Brakes 2pc Fully Floating Front & Rear Brake Disc made specifically for your BMW M2 G87 460bhp 2023+. Available for $1,222.07 each, the 380x36mm (front) and 370x24mm (rear) discs can be bolted directly onto the respective axles of these vehicles, offering impressive braking performance and longevity, particularly when driven hard on road and track.

CLICK HERE to get the 2pc Fully Floating Rear Brake Disc

CLICK HERE to buy the 2pc Fully Floating Front Brake Disc

2. Milltek Center Resonator Back System with GT-115 Burnt Titanium Tips BMW 2 Series G87 M2 Coupe S58 NAS Non-OPF | OPF | GPF Models 2023+

The center resonator is famous for fine-tuning the exhaust note, modifying the sound, reducing noise levels, and influencing the overall exhaust flow dynamics. This is why we recommend this $3,975 center resonator by Milltek Sport. Manufactured from T304L stainless steel, this center resonator is durable and can last within some of the toughest environments, as it is far less susceptible to degradation and discoloration.

3. Eventuri Black Gloss Carbon Intake System V2 BMW G8X / G87 M2

We can’t recommend a carbon fiber intake system enough, especially this $2,995 one from Eventuri.  This system will;

• Improve airflow
• Reduce pressure loss
• Increase the flow rate
• Improve performance
• Improve sound and throttle response

You should also know that this system is future-proof in its capacity to cater to high-powered builds well in excess of 1000hp. The Eventuri G8X M2/M3/M4 intake system consists of a number of components engineered to perform a specific purpose and fabricated to the highest of standards. Made using 100% pre-preg carbon fiber with no fiberglass, this system causes a performance gain of 13-18hp, 12-16ft-lb (Stock Tune)

4. BMC CKS Glossy Paint Carbon Racing Filter Kit BMW Supercar M2 | M3 | M4 G87/G80/G82

This is another performance upgrade for your BMW M2 G87, for the price of $3,000, you can get this upgrade that will lead to performance gains in terms of acceleration, throttle response, and overall engine power. This kit is made by BMC Air Filters, a brand that has been designing, engineering, developing, and producing in-house complex and performance carbon complete intake kits and systems for the world’s most important and renowned car manufacturers for more than 20 years, so you can trust its quality and performance.

Features:

• The cotton gauze BMC uses has larger links, allowing a better airflow, but using several layers of oil-soaked cotton allows it to block any impurity larger than 7 microns.
• BMC air filters scored an impressive 97,5% filtration efficiency at the ISO5011 test.
• Maximum air permeability and higher air flow passage.
• BMC equips some of the most important teams in Formula 1, MotoGP, and WorldSBK.

Kit Includes:

• 1 Cover
• 2 Airboxes
• 2 Air Filters

5. Dinan Stainless Steel Valved Axle-Back Exhaust w/ Black Tips BMW M2 G87 2023-2024

The last upgrade we recommend in this blog is an axle-back exhaust system made by Dinan. This system is available in our shop for $1,999.95, and it is the best upgrade for your M2 because of its design features which will help you achieve;

• desired sound volume and tone worthy of the G87 M2
• allow freer flow
• reduce backpressure

This system’s design features also help limit noise during low-speed driving and produce a more subdued, albeit deeper, and agreeable note. However, when the valves are open during high-load conditions the bulk of the gases bypass the muffler altogether for a near-straight pipe design and maximum aural enjoyment to be achieved. Apart from sound, the system is also immaculate looking and makes for an affordable, perfect addition to your ride.

Features:

• Maximum gains of +6 HP and +5 lb-ft of torque
• Enjoyably louder, sportier sound
• Drone abatement technologies used to reduce cabin resonance
• Four, diffuser filling, 4.5-inch (114mm) double-walled, polished stainless steel clamp-on tips with laser engraved Dinan logo
• Larger diameter piping for increased flow (76mm vs. 70mm)
• 6-pounds lighter than the stock axle back (Stock: 44-pounds vs. Dinan: 38-pounds)
• Stock exhaust valve actuators are reused, and the operation of the exhaust valve is unchanged so the exhaust tone can be adjusted via the M-drive settings
• Computer-controlled exhaust valves are retained and limit noise during low-speed driving and open fully during high-load conditions
• 100% 304 Stainless Steel construction
• Factory-like fitment with included mounting hardware

If you have any questions or you would love to buy products that improve your BMW M2 G87’s performance and aesthetics, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

Coilover upgrades are quite popular within the car enthusiasts’ community because of how they revolutionize a car’s handling and performance for the better. The right coilovers are usually game changers, as they offer ride comfort and customizable damping, and allow you to adjust your ride height for aesthetics or even the freedom to drive in different conditions. There are many things to consider when buying a coilover, like your ride, and its use, your budget, street-legal considerations, ride height adjustment, and more factors.

Choosing the right ones, maybe a dilemma that many face considering that different brands sell quality coilovers, with different features, and prices. But in this blog, we are going to cover the differences between HKS’s Hipermax R Coilovers, and BC Racing BR Series Coilovers, both of which fit the Nissan Z. Apart from being manufactured by different brands, their prices are another easily identifiable differentiator. The HKS Hipermax R Coilovers are available for an average price of $3000, while the BC Racing BR Series Coilovers are available for an average price of $1500.

HKS Hipermax R Coilovers

Made by HKS, a Japanese brand famously known in the aftermarket industry for its high-performance products, this coilover makes your ride fun to drive, as it raises driving comfort. Once installed this kit will deliver a thrilling driving experience with a balance optimized for both circuit and winding roads. The Hipermax R coilovers are the best choice for you if your main focus is the drivability on the track and also maintaining daily driving comfort.

Features:

• Single Tube
• A dual preload valve system
• 30 Levels of Adjustable Damping
• PNE Coating
• Shock-body Length Adjustable
• Pillow Upper Mount
• Spec Change Available
• Overhaul Available
• Super Response Fluid (SRF)
• Upper Spring Retainer
• Low Vibration Spring (LVS)

The Hipermax R Coilovers have technical features like;

1. SRF – (Super Response Fluid) Exclusive newly developed Oil which causes;

• Improved damper oil quality and viscosity.
• Improves characteristics of Damping force, achieving great handling performance.
• Suppresses temperature change caused by heat

2.      LVS – (Low Vibration Spring) Exclusive high-strength Spring

• Manufactured with 210k grade high-strength wire rods.
• Adopted to shorten wire length and reduce weight.
• Improves Steering response.

3. Upper Spring Retainer Exclusive for HIPERMAX R

• Allow the damping axis and spring load lines to align coaxially
• Reducing friction.
• Smoother damping

BC Racing BR Series Coilovers

Founded in 2006, BC Racing is known for manufacturing outstanding coilover systems for motorsport applications. To make sure that the company releases well-balanced aftermarket suspension products, they do extensive testing of each vehicle and refine the coilover characteristics as many times as needed, so you should expect nothing but the best product and performance when you install the BR Series coilovers. The BC Racing BR Series offers the highest performance, comfort, build quality, vehicle height, and handling, all while being very affordable. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, you can’t go wrong with the BC Racing BR Series Coilover System.

Features:

• Highly customizable
• Mono-tube shock design
• Linear piston and damping curve
• Height adjustment independent of spring compression
• 30-clicks of simultaneous compression/rebound adjustment
• Front camber plates are standard on applicable kits
• Rear camber plates available for applicable kits
• Custom spring rates and swift springs are available
• Custom valving or valving paired for custom spring rates
• 1-Year warranty against manufacturer defect
• Fully rebuildable

We recently spotted the 2016 Mercedes-Benz AMG GT S decorated with VR Forged D05 wheels, and to say that the ride is breathtakingly gorgeous is an understatement. This powerful ride was upgraded with a full conversion dry carbon Black Series kit, 20” staggered VR forged wheels, Michelin tires, full custom interior, muffler delete exhaust, ECU tune, and red calipers, as seen in photos below the car is a jaw-dropper. This stunning car is on sale right now, CLICK HERE for more details on how to buy it.

You can also get the VR Forged D05 wheel seen in the AMG GT S photos below, by clicking the link below. This wheel has an elegant design, with some machine work that gives it a race-inspired finish. This is a perfect wheel fitment for the Mercedes-Benz AMG GT S, and it can also fit any luxury coupe or sedan vehicle. The VR Forged D05 is a monoblock wheel that is incredibly strong and flawlessly matches the aesthetics and style of the AMG GT S as seen in the photos below.

Available in our shop in a Gloss Black finish, the VR Forged D05’s split spoke design towards the barrel of the wheel will keep the eye focused on the precision CNC machining, hence making you stand out from the crowd. The front wheel’s recommended tire size is 245/35/20 or 255/35/20, and the rear is 325/30/21 or 325/25/21. The front wheels are available in 20×9.5 +50mm 5×112, and the rear wheel is available in 21×11.5 +55mm 5×112. The VR Forged D05 is a stunning piece that features a unique design that will enhance your car’s handling and braking power. Guaranteed to make your AMG GT S stand out, this lightweight wheel has a 690 kg load rating which guarantees impeccable performance, and safety. Click on the link below to buy the VR Forged D05 now!

Click Here to Buy the VR Forged D05 Wheel for Your AMG GT S

If you have any questions about VR Forged Wheels or if you need new wheels for your AMG GT S, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

Mk5 Supra is a turbocharged sports car with a race-inspired design, incredible handling, and higher power output. This ride doesn’t disappoint when it comes to performance and style, and this is why the VR Forged D03-R Wheels upgrade is the perfect match for it as they complement these features well. Manufactured by VR Forged which has a reputation for manufacturing the best quality wheels that provide enhanced looks, great ride quality, and exceptional performance, the VR Forged D03-R is available in our shop for $2,500.

The VR Forged D03-R is a full 1pc forged monoblock wheel with has a similar design to the D03 but with a very motorsports-inspired ring. Manufactured using a 10,000-ton press, this incredibly strong wheel is the perfect fit for your A90 Toyota Supra and any “tuner” style vehicle. The VR Forged D03-R wheel is available in our shop in a Matte Black finish, and the front wheels are 19×9.5 +22mm 5×112 and the rear wheels are 19×10.5 +35mm 5×112.

The D03-R is a high-performance wheel designed for both; speed and performance, and in addition to that the machine work near the center of the wheel draws your eye in while the stylish outside ring keeps the wheel visually stunning. So expect an enhancement of aesthetics, improved performance, ride comfort, and better handling after installing the VR Forged D03-R. Check out the photos below to see what a great addition to your vehicle this wheel actually is, we promise you it will have you second-guessing your next car purchase

Click Here to Buy the VR Forged D03-R Wheels for Your Mk5 Supra

If you have any questions about VR Forged Wheels or you need new wheels for your Toyota Supra, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

As a car enthusiast and a reader of this blog, you must have read about the 7 Modifications That Won’t Void Your ’22+ Subaru WRX’s Warranty, or maybe you might have gotten new upgrades ideas from the Top 10 Best ’22+ Subaru WRX Modifications blog. Those are good mods and we highly recommend them, however, at the end of the day, everyone asks, “What is the best investment I can make for my Subaru?”. So for this blog, we are going to answer the most asked question by Subaru WRX owners.

Without beating around the bush, the best, most affordable, and safe investment you can make for your Subaru WRX is definitely an air oil separator. If you care about your Subaru’s performance and want the engine to last long, then it is crucial to install this component. Air oil separators do one of the most important jobs for the engine, they act as a filter for the air passing through the system.

How Air Oil Separators Work

Street-legal vehicles are not allowed to vent blow-by gases into the atmosphere and hence they have to be recirculated back into the vehicle. Unfortunately, oil is often picked up in the crankcase vents, and if not for the air oil separator which does an amazing job of capturing and separating oil vapors from the engine’s crankcase gases, it would have made it back to the intake system causing;

• Oil build-up
• Detonation
• Oil Loss

Why Oil Separators are so Crucial for a Subaru WRX

Once installed, air oil separators bring out a lot of positive outcomes for the turbocharged Subaru such as the WRX. Some of the benefits of installing an oil separator on your Subaru WRX are;

• Carbon buildup prevention – Oil vapors can contribute to carbon deposits forming on the intake valves and intake manifold surfaces. An oil separator traps these oil vapors, hence preventing them from reaching critical engine components and reducing the potential for carbon buildup.
• Increases intercooler efficiency – In high-performance vehicles like the Subaru WRX, maintaining consistent power delivery and efficiency is crucial. Oil separators help to ensure that the engine receives the right air-fuel mixture for optimal combustion hence positively impacting the overall performance and efficiency.
• Reduces the chance of performance-robbing detonation – Another major benefit of using a separator is that it prevents excess combustible oil from getting to the cylinder. Too much oil can cause premature combustion in improper parts of the engine. These detonations can cause significant damage, especially if they are allowed to continue.
• Engine longevity and performance – By reducing the amount of oil vapor entering the intake system, an oil separator can help maintain cleaner intake valves and combustion chambers. This can lead to improved engine longevity, more consistent performance, and potentially better fuel economy.
• Many Subaru WRX owners are enthusiasts who enjoy modifying and tuning their vehicles for increased performance. For enthusiasts, this is one of the smartest upgrades to do.

How Do I Install an Air Oil Separator?

After reading about these benefits, you might want to buy an oil separator for your Subaru WRX. Installing this component sounds complex, but it is so much easy to do. Here are a couple of steps to follow if you are installing the oil separator by yourself;

• Locate the PCV hoses.
• Mount the bracket for the AOS in an appropriate location near the PCV lines.
• Disconnect the PCV hoses.
• Remove the existing oil catch cans if there is one.
• Connect AOS to the PCV hoses. If there was no existing catch can, you may need to add a second hose.
• Connect the drain hose to the oil system.
• Mount the on the bracket.
• Reconnect the OCV hoses.
• Now the oil separator is fully installed, and ready to clean your blow-by gases.

Overall air oil separators are crucial for vehicles like the turbocharged Subaru WRX because the vehicle is prone to oil loss so installing this component helps maintain engine performance, prevent carbon buildup, and prolong engine longevity by effectively capturing and separating oil vapors from blow-by gases before they enter the intake system. This is particularly an important investment in high-performance engines with direct injection technology and for enthusiasts who are likely to modify their vehicles.

NOTE:

• You should follow the specific installation instructions from the manufacturer for your air oil separators.
• We think we have covered the basics when it comes to air oil separators, but don’t hesitate to reach out to us for any questions on Subaru WRX or air oil separators, you can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

We have good news for the owners of the Honda Civic Type R (FK8) from EBC Brakes, a leader in manufacturing rotor brake components. The company’s latest release is meant to improve your Honda Civic Type R’s stopping power in an astonishing way. We at Vivid Racing are committed to giving you the best products and recommendations that improve your car’s driving characteristics, so we are happy to let you know that the EBC Brakes Racing 6-Piston Apollo Big Brake Kit is now available in our shop and can be bought by clicking the links below.

One doesn’t need much convincing as to why this is the best upgrade for their high-performance Honda Civic Type R (FK8). The car is perfect as a road/track sports car with a powerful engine, and enhanced handling capabilities, with outstanding features like those, a brake upgrade will only deliver maximum braking performance and bring out the best driving experience by;

• improving braking performance and reducing brake fade during track use
• effective heat dissipation
• aesthetics purposes
• giving the car a firmer and more responsive brake pedal feel

The EBC Brakes Racing 6-Piston Apollo Big Brake Kit for the Honda Civic Type R (FK8) is proudly engineered in the UK, and it comes complete with all the hardware needed to replace your stock braking system.

Kit Includes:

• 6 Piston front calipers
• 380mm Fully floating two-piece rotors
• Front Bluestuff NDX pads
• Front braided lines
• All fluid/fixtures required

Features: Apollo Series 6 Piston Calipers 

• EBC’s lightweight-yet-strong aluminum 6-piston brake caliper
• Two-piece bolted design that incorporates high-tensile 12.9-grade steel bolts for reinforcement of the caliper bridge section (computer FEA analysis shows that this offers significant improvements in caliper stiffness compared to a monobloc design)
• Machined from heat-treated low-pressure castings (this offers a noticeable performance advantage over conventional gravity cast calipers, exhibiting higher overall strength and a comparable caliper body stiffness to forging)
• High-temperature fluid seals coupled with full boot-type dust seals give maximum protection against road grime and debris-Lightweight, hard-anodized aluminum staggered pistons with serrated/castellated piston noses that reduce heat transfer into the braking hydraulics
• Every single brake caliper pressure tested to 2,500psi
• Full stainless-steel hardware and fittings, providing durability and longevity–this caliper will never rust
• Uses standard pad shapes, giving choice when selecting brake pads
• Rather than a powder-coated finish, all Apollo calipers use an advanced high-temperature Teflon polyester coating process to ensure they look great for much longer. Currently available in Stealth Black, Storm Shadow Blue, Luminous Yellow, and Racing Red

Features: Fully-Floating Two-Piece Rotors

• Fully-floating 380x36mm two-piece rotors that allow the outer ring to expand freely in response to heat (this reduces stress which in turn extends rotor life and reduces the tendency for rotor cracking during extreme use)
• Drive bobbins machined from a single piece of stainless steel giving maximum strength and corrosion resistance (this reduces maintenance requirements and ensures the outer ring continues to float freely over time)
• Rotor rings feature 48 directional internal curved vanes for improved cooling
• Unique ‘Swept Groove’ slot design for effective evacuation of braking dust and gases whilst ensuring good initial bite on brake application
• Now featuring the latest thermic black corrosion-resistant finish–the very latest in rust prevention

Features: Bluestuff NDX Performance Brake Pads

• Every EBC 6-piston Apollo Big Brake Kit is supplied with EBC Bluestuff NDX pads for the front axle
• Now road legal in most markets, Bluestuff NDX combines excellent cold bite with the capability to perform well in short spells of track/race conditions

Features: Stainless Steel Braided Brake Lines

• Every kit is supplied with EBC Brakes’ stainless-steel braided brake lines for the front axle
• Every hose has a stainless-steel braided exterior that prevents a phenomenon known as ‘ballooning’, this braided exterior prevents the spongey feel of OE rubber lines and provides greater precision and feel under braking

Features: Super DOT 4 Brake Fluid

• Every kit is supplied with 1 litre of BF307+ super DOT 4 brake fluid. This fluid has a 310°C boiling point–a significantly higher boiling point than standard DOT 5.1 fluid
• Having such a high boiling point gives the braking system exceptional endurance, allowing you to push hard for extended periods without heat soak causing the fluid to boil and resulting in a fade

• CLICK HERE to buy the EBC Brakes Front S25 Kits Redstuff & SG2F Rotors Honda Civic Type R 2.0 Turbo Petrol 2017-2023
• CLICK HERE to buy the EBC Brakes Front S27 Kits Bluestuff Pads & SG2F Rotors Honda Civic Type R 2.0 Turbo Petrol 2017-2023
• CLICK HERE to buy the EBC Brakes Front S26 Kits Yellowstuff & SG2F Rotors Honda Civic Type R 2.0 Turbo Petrol 2017-2023
• CLICK HERE to buy the EBC Brakes Front S30 Kits RP-X Race Pads & SG2F Rotors Honda Civic Type R 2.0 Turbo Petrol 2017-2023
• CLICK HERE to buy the EBC Brakes Front S29 Kits RP-1 Race Pads & SG2F Rotors Honda Civic Type R 2.0 Turbo Petrol 2017-2023
• CLICK HERE to buy the EBC Brakes Racing Rear 305mm SG Series Sport Disc Rotors (Pair) Honda Civic Type R 2.0T 2017-2023
• CLICK HERE to buy the EBC Brakes Pair Rear SG Series Sport Discs Honda Civic Type-R 2017-2021

We are so happy to announce some good news from CTS Turbo for owners of MQB vehicles. The company has released a budget-friendly-direct-bolt-on hybrid turbocharger for the 2015-2020 MQB platform. The kit is available in our shop for $1,499.99. CTS Turbo as a leading brand in the automotive industry is known for manufacturing and wholesaling performance parts for late-model Audi, BMW, and Volkswagen, their latest release fits all MQB-based EA888.3 vehicles such as:

• 2015-2019 VW Golf/Sportwagen/Alltrack
• 2015-2020 VW GTI
• 2015-2019 VW Golf R
• 2019-2023 VW Jetta GLI
• 2018-2021 VW Arteon
• 2015-2020 Audi A3
• 2015-2020 Audi S3
• 2015-2020 Audi TT
• 2015-2020 Audi TTS
• ROW models can vary

This turbocharger will change your driving experience like never before by giving your ride massive power gains and superior performance. With this turbocharger, the engineers at CTS Turbo took successful features from their previous releases and made them better. They kept the journal bearing CHRA from the IS38 turbocharger and increased the thrust bearings and thrust collars by 2 mm, to match the larger wheels and the performance-oriented nature of this upgrade.

They also increased the turbo’s oil passages by 0.72mm and put the turbo through extensive in-house tests to make sure that it delivers the highest performance at different altitudes and climates. Their main goals were to manufacture a turbocharger with fast spool times, massive torque gains, and reliable solid mid-range performance, so its safe to say that the CTS Turbo JB-600 Journal Bearing Hybrid Turbocharger MQB Platform 2015-2020 delivers that and more.

Designed for street use, this turbocharger delivers approximately 600 crank hp, around 520-530whp on E85 and 430-460whp on pump 93 octane**. As a performance upgrade, this turbocharger will do wonders for the power and efficiency of your MQB platform. You should also know that this system is engineered to be very durable and withstand the high-performance demands you intend to put it through.

Features

• Perfect street turbocharger upgrade, fantastic spool, and mid-range response
• Journal bearing direct-fit CHRA (compatible with all factory oil and coolant lines)
• Billet reverse rotation compressor wheel, 53.1mm inducer, 71mm-76mm exducer with extended tip (6+6 blade configuration)
• Inconel TD06SL2 reverse rotation turbine wheel, 54mm exducer, 60mm inducer (11 blade configuration)
• Stainless Steel proprietary turbine housing, made precisely for factory fitment
• VSR Balanced to OE tolerances
• Compatible with most tuning solutions for popular hybrid turbos (United Motorsport, Eurodyne, COBB)
• Compatible with OE or replacement wastegate actuators
• Compatible with OE or aftermarket turbo inlets and turbo outlets, however, we recommend our 2.5″ turbo outlet pipe, see below

Required Parts (Not Included):

• Performance downpipe
• Performance air intake
• Performance intercooler
• Factory or aftermarket wastegate actuator
• Software tuning for hybrid turbo
• Installation hardware for factory turbocharger, listed at the bottom of the page

Recommended Parts (Not Included):

• 2.5″ turbo outlet pipe
• MPI kit and upgraded fuel pump, confirm with your tuner
• HPFP upgrade, confirm with your tuner
• High-flow exhaust

Notes:

• Always follow the proper procedure for checking/adjusting the wastegate actuator when installing the turbo! Recommended wastegate actuator voltage: 3.4V-3.6V
• We recommend keeping the boost within 25-28psi, less if you’re limited by fueling or a stock engine. Do not exceed the recommended boost range, as it will reduce efficiency.
• Installation must be performed by a qualified technician. Always pre-fill the turbocharger, replace engine oil and filter, and follow proper break-in procedures.
• Installation hardware or gaskets (use same install kit as the factory turbo), wastegate actuator, and turbo outlet fitting not included.

Hardware and gaskets required for installation:

• 06L253039A – Turbo Inlet Gasket
• 5Q0253115B – Turbo Outlet Seal
• WHT007210 -Turbo Mount Nuts (x4)
• N90067202 -Turbo Oil Line O-ring (x2)
• WHT006112 -Turbo Oil Line Gasket
• WHT006113 -Turbo Oil Line Gasket
• WHT006114 -Coolant Hose O-Ring
• WHT006124 -Coolant Hose O-Ring
• WHT005558 -Coolant Hose O-Ring

If you have any questions or you would love to buy products for your MQB platform, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

The Lamborghini Huracán STO is a high-performance supercar specifically designed as the track-focused model of the Lamborghini Huracán. The STO boasts a distinctive and aggressive design, with features that make it stand out both on the road and on track days. For a track-focused supercar, with technology of STO’s caliber, and race-inspired design the best modification to go for that will optimize aerodynamics, downforce, and airflow management, and contribute positively to stability, cornering capabilities, and overall track performance is the aero body.

We are proud to announce this good news from Vorsteiner to Lamborghini Huracán STO, as they have released their latest aero program fit for the supercar. With this aero program, Vorsteiner just made the Lamborghini Huracan STO a whole lot more insane. Vorsteiner is a world-renowned brand known for its vision to create the highest quality parts for the most elite automobiles and customers, and with this elite program, they didn’t drift away from that.

What are all the parts of this newly released aero program?

1.) Front Spoiler

Vorsteiner is known for being innovative, and for creating superior products, and the products in this aero program solidifies that point. This aero front spoiler made specifically for the Huracán STO has an aerodynamic purpose and it will improve your supercar’s performance and handling characteristics, particularly on the racetrack. In addition to that, this front spoiler is made from carbon fiber will generate downforce, improve front-end grip and contribute to the stability of your ride at high speeds.

• CLICK HERE to buy the Vorsteiner Aero Front Spoiler Carbon Fiber PP 2×2 Satin Lamborghini Huracan STO 2021+
• To buy the Vorsteiner Aero Front Spoiler Carbon Fiber PP 2×2 Glossy Lamborghini Huracan STO 2021+ – CLICK HERE

2.) Hood Ducts

Hood ducts allow air to flow into or out of the engine bay or other components, and so they serve an important function in managing a vehicle’s aerodynamics and cooling. This is an important upgrade for your Lamborghini Huracan STO, as high-performance cars often require increased cooling capacity, and hood ducts can provide an additional means of achieving that. This hood duct has top-notch quality as Vorsteiner manufactures components using carbon fiber material which results in products with superior rigidity, aerospace strength, and unmatched toughness when compared to conventional hand-laid carbon fiber composite.

• CLICK HERE to buy the Vorsteiner Aero Hood Ducts Carbon Fiber PP 2×2 Satin Lamborghini Huracan STO 2021+
• To buy the Vorsteiner Aero Hood Ducts Carbon Fiber PP 2×2 Glossy Lamborghini Huracan STO 2021+ – CLICK HERE

3.) Rear Diffuser

This Vorsteiner rear diffuser is a great upgrade for your performance-oriented Lamborghini Huracan STO. Made to perfectly fit the underside of your vehicle’s rear bumper, this rear diffuser’s purpose is to manage and optimize the airflow underneath the car, contributing to improved aerodynamics, stability, and downforce. This rear diffuser is available in two finishes, Satin, and Glossy, click the links below to grab them!

• CLICK HERE to buy the Vorsteiner Rear Diffuser Carbon Fiber PP 2×2 Satin Lamborghini Huracan STO 2021+
• CLICK HERE to buy the Vorsteiner Rear Diffuser Carbon Fiber PP 2×2 Glossy Lamborghini Huracan STO 2021+

4.) Side Intakes

Side intakes, also known as side vents, are openings on the sides of a vehicle that allow air to enter and flow into specific areas of the car. For high-end and high-performance vehicles like the Huracan STO, these intakes serve various functional and aesthetic purposes, including;

• Engine cooling
• Air Intake for performance
• Brake cooling
• Aerodynamics (downforce and stability)
• Aesthetics enhancement

Click the links below to buy side intakes for your track-oriented Huracan STO

• CLICK HERE to buy the Vorsteiner Side Intakes Carbon Fiber PP 2×2 Satin Lamborghini Huracan STO 2021+
• To buy the Vorsteiner Side Intakes Carbon Fiber PP 2×2 Glossy Lamborghini Huracan STO 2021+ – CLICK HERE

5.) Canards

Canards are vital for managing airflow, and they also contribute to improved aerodynamic performance and stability. Found on the front of a vehicle near the corners of the bumper or front fenders, Canards are also known as dive planes or vortex generators. Canards are the best mod for your Huracan STO as they provide reduced understeer, aerodynamic balance, and enhanced cornering performance and they are aesthetically pleasing.

• CLICK HERE to buy the Vorsteiner Aero Canards Carbon Fiber PP 2×2 Satin Lamborghini Huracan STO 2021+
• CLICK HERE to buy the Vorsteiner Aero Canards Carbon Fiber PP 2×2 Glossy Lamborghini Huracan STO 2021+

6.) Side Rockers

The last but not the least product in the Vorsteiner aero program for the Lamborghini Huracan STO is the side rockers, also known as side skirts or side sills.  Side rockers which are located along the sides of a vehicle, running parallel to the ground between the front and rear wheel arches, are installed for functional and aesthetic purposes such as downforce generation, balance and stability, better handling, protection from road debris, and more. Click the links below to grab some for your ride.

• CLICK HERE to buy the Vorsteiner Side Rocker Carbon Fiber PP 2×2 Satin Lamborghini Huracan STO 2021+
• CLICK HERE to buy the Vorsteiner Side Rocker Carbon Fiber PP 2×2 Glossy Lamborghini Huracan STO 2021+

When we said that this kit will turn your Huracan STO into an insane supercar we meant it, each product listed here adds positively to the aerodynamic characteristics of this track-focused ride. And trust us, on the track you need benefits provided by these products such as stability, airflow management, enhanced cornering performance, improved high-speed stability, and more. If you have any questions about Vorsteiner Aero Program or you would love aftermarket products for your Lamborghini Huracan STO don’t hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

There’s no easier way to communicate your love of adventure than owning a Toyota Tacoma. This midsize pickup truck is one of the most well-built and capable rides out there. If you are in the market to add more power to your Tacoma, you should know that there are more affordable ways to get more power from your engine without adding a supercharger. In this article, we are going to share the top 5 upgrades you can do that will help you to get more power and performance from your Tacoma without supercharging.

1. Throttle Body

While the 4.0L and 3.5L V6 engines in Toyota 4Runners, Tacomas, and FJs are undoubtedly reliable, they lack the desired punch in terms of raw power. These vehicles, known for their off-road capabilities and versatility, are often heavily modified with larger tires, and loaded with gear. An easy upgrade that is worth every penny is an upgraded Throttle Body. The stock throttle body on the 3rd Gen Tacoma is 70mm. This can reasonably be enlarged to a 76mm bore allowing for much more airflow. This will result in more power and responsiveness from your V6 power plant. One that we recommend and is a staff favorite is the aFe Power 76mm Throttle Body. We love this option because it’s simply plug-and-play, just how it should be! AFE includes all the hardware needed with simple installation instructions.

• 76mm Bore Diameter, No Tuning Required
• Plug-n-play Electronics
• Billet Aluminum Adapter
• More Power and Better Throttle Response
• Hardware and Gasket Included
• Direct Bolt-On For Simple Installation

2. CSF High-Performance Radiator Toyota Tacoma 2005-2021

Even though the Tacoma is well-built, the one hindrance to its greatness quite limiting is the lacking a factory-provided radiator. This performance radiator by CSF increases heat dissipation by approximately 15% and also maximizes airflow. It was designed to withstand any offroading conditions, on top of it being easy to install with no modifications needed.

3. RIPP Superchargers High-Performance Coil Packs Toyota Tacoma 3.5L V6 2016-2021

A coil pack is like a large capacitor that generates spark energy for each individual spark plug during each engine revolution. It is a great way to improve performance and gas mileage. On top of that it is really affordable for the performance. Compared to stock coil packs, the RIPP High-Performance Coils are totally redesigned and re-engineered to add up to 44% more power which translates to better MPG, more responsive throttle input, and an overall better driving experience when installed.

4. Pedal Commander Performance Throttle Controller 38 BT Toyota

A throttle controller removes response delays on your electronic accelerator pedal, and in turn, it allows your engine to respond faster. With this Pedal Commander Performance Throttle Controller, your car can accelerate faster. Pedal Commander is programmable according to your desire within your car’s specifications. With their app and BlueTooth feature it can be easier to control all of the functions directly from your phone.

5. AWE Dual Diamond Black Tips 0FG Exhaust w/ BashGuard Toyota 3rd Gen Tacoma 2016-2023

The last upgrade you can do to get more power from your Tacoma is this AWE Exhaust. This system gives you full-bodied aggression and the best sound on the road. Once installed you will unlock a superior soundtrack and optimal flow compared to the stock system. The system is available with two tip options including Diamond Black and Chrome Silver tips, and the tip outlets, although conjoined, offer vertical adjustability, and the tips themselves are individually adjustable allowing depth into the bumper to be set according to personal taste.

If you have any questions or you would love to buy products that improve your Toyota Tacoma, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

Made for the adventurous, and coolest bunch among us, Ford Bronco is an off-road SUV with a unique and sporty aesthetic. This four-wheel-drive Ford fits beautifully on the trails as it does on well-paved roads. If you own this ride, you don’t want your adventures stopped by bad weather or bad lighting when navigating untamed routes and tough terrains. This is why you need fog lights on your Bronco. Headlights may illuminate well at nighttime, but they can’t cut through dense fog, mist, heavy rain, or snow, and this is what fog lights are designed for.

Mounted below the headlights, fog lights are important modifications for your Ford Bronco, as they improve visibility in fog, provide safety when you are driving during adverse weather conditions, reduce glare, and enhance the appearance of your ride in a way that differentiates you from the pack. Because they are not legally required, many manufacturers do not provide fog lights, but that doesn’t mean you can’t install them to equip yourself with the best gear for your off-road adventure. So, if you are in the market for fog lights, we are going to share the top 7 fog lights that we recommend for your Ford Bronco

1. Baja Designs Bronco Fog Pocket Kit Ford Bronco 2021

For over 25 years, Baja Designs has been manufacturing quality off-road lighting products. Baja products are known for their style, fitment, performance, and ease of installation, and this Ford Bronco fog light is no different. This kit specifically utilizes a set of S2 Sports in Driving/Combo, a set of S2 Sports in Wide Cornering, and a set of Squadron Sports in Spot. If you want maximum trail coverage in your adventures, this is the best fog lights pick for you.

Features:

• Satisfaction Guarantee – 30-Day Money Back Guarantee
• Limited Lifetime Warranty – Complete Purchase Protection
• service – Replaceable Lenses And Optics
• ClearView – All The Light, Right Where You Need It.
• MoistureBlock – Waterproof, Rain Proof, Submersible
• CopperDrive – Only LED Driven At 100 percent
• 5000K Daylight – Less Driver Fatigue, Natural Color

Fitment:

• Ford Bronco (21 – On)

Kit Includes:

• S2 Sport, Driving/Combo Pair
• S2 Sport, Wide Cornering Pair
• Squadron Sport, Spot Pair
• x2 Bracket Fascia Pieces
• x6 Light Mounts
• x2 Toggle Switch Harnesses
• x2 55-inch Splitters
• x2 small Splitters

2. Heretic Studio Fog Light Kit – Clear Quattro Ford Bronco

Heretic Studio has been a USA-based manufacturer of high-performance lighting solutions for 12 years now. The Quattro has the highest quality of electronic circuitry making it one of the brightest and best lights. This fog light has durable and high-quality housing, and it was manufactured using the highest-grade LEDs and circuit boards that allow this light to be as bright as it can be while still controlling heat. Heretic Studio offers two choices of lens for this fog light, there are clear lenses and amber lenses available for you to choose from for dusty and foggy conditions.

Features:

• (4) 6-watt CREE LED
• Full 24 watts driven at 100%
• 2904 lumen
• 6061 billet housing 3 x 2.75 x 1
• IP68 rated Stainless steel mounts
• Constructed from a Single Block of Aluminum: Single block construction for a seamless design that keeps the elements out and lasts longer than typical aftermarket plastic lights.
• Optimized Light Shape & Lumens: The brand uses the highest quality circuit boards, reflectors, and LED bulbs to not only produce the industry’s best lumen counts, but the best light shape on the market.
• Heat Management: The self-regulating circuit boards paired with aircraft-grade aluminum housings with cooling fins create a more efficient heat transfer, allowing lights to function at full capacity.
• Made in the USA
• Versatile Mounting Options: Mounts to most aftermarket bumpers, grille, and roof racks.

Kit Includes:

• 2 Amber or Clear Lens
• Quattro Lights
• 4 Clear Lens BA-2 Lights
• Fog Light Mounting Brackets
• Upfitter wiring adapters

3. Morimoto 4Banner Mounting Bracket + Lights

For more than a decade, Morimoto has been in the business for building the best lighting upgrades for the automotive aftermarket. Their products are known for being reliable, and best in style and performance and the 4Banger NCS Off-Road LED light which was completely designed, engineered, and tested in the USA is no different. These headlights produce a wide beam that will improve visibility off to the sides of the road, and they pair well with the Morimoto headlights. We have two options of these street legal fog lights for you to choose from, the white output version, and the yellow output version, and both are available for $300.00. The white-output version is ideal for all-around visibility, but if you desire optimal output in rain, snow, or fog–the Yellow-output version is the best option for you.

Fitment:

• Universal: With Included U Brackets
• Ford F-150 2015-1020 (with BAF013 and BAF038)
• Ford F-150 2007-2014 (with BAF020 and BAF037)
• Ford Raptor 2017-2020 (with BAF024 and BAF038)
• Ford Super Duty 2017-2021 (with BAF013 and BAF039)
• Ford Super Duty 1999-2016 (with BAF021 and BAF040)
• Toyota 4Runner 2010+ (With BAF014 and BAF027)
• Toyota Tacoma 2005-2013 (with BAF019 and BAF029)
• Toyota Tacoma 2014-2021 (with BAF014 and BAF028)
• Toyota Tundra 2007-2013 (with BAF019 and BAF030)

CLICK HERE to buy the Morimoto 4Banger NCS LED Pods (SAE Wide / Yellow) Set Ford | Toyota 1999+

To buy the Morimoto 4Banger NCS LED Pods (SAE Wide / White) Set Ford | Toyota 1999+ – CLICK HERE

CLICK HERE to buy the Morimoto 4Banger Triple Fog Kit (brackets only) Ford Bronco 2021-2023

4. ZROADZ Black Front Bumper OEM Fog LED Kit w/2 3″ Amber & 4 3″ White LED POD Lights Ford Bronco 2021+

If you are in the market for fog lights, but don’t want to hire a professional to mount them for you, this is the best choice for you. Made by ZROADZ, this $494.50 fog light is a quick and easy way to add forward-facing lighting to your vehicle. Made in the USA, this is a simple bolt-on kit, and is available in complete kits with light and wiring harnesses or as brackets only for mounting common and popular LED light bars. This kit is so easy to install, it takes under 30 minutes to be installed even by the most casual enthusiast.

Features:

• Front Bumper OEM Fog LED Kit with White and Amber Pod Lights
• Sold as a complete kit, Includes: (4) 3 Inch White ZROADZ LED Pod Lights, (2) 3 Inch Amber ZROADZ LED
• Pod Lights, mounting brackets, wiring harness with the fusible link, relay, toggle switch, and all necessary hardware
• 1712 Lumens, 20 Watts, CREE 5W LED Chips per pod light
• Flood Beam, IP68 and IP69K Protection Rating, 50000 Hour Life Span
• Mild Steel
• Easy, bolt-on installation, no drilling required
• Powder-coated semi-gloss black finish
• Limited lifetime product warranty, 3-year warranty on the finish
• Manufactured by ZROADZ Off-Road Products in Corona, California. Made in USA
• Kit includes (2) individual wiring harnesses that allow for separate wiring and control of the white/standard and Amber LED pods
• Also available as bracket only, see the part number?Z325401 or with white pods Z325401-KIT, or amber pods Z325401-KITA
• Fits Heavy Duty Modular Bumper Models Only

5. Diode Dynamics Elite Series Fog Lamps

The Elite Series by Diode Dynamics, these fog lights were designed for true performance delivering up to 5 times more output than halogen lamps. The lights are easy to install and will add both road-legal fog lights and powerful offroad lighting. We have two Elite Series options for you to choose from; Diode Dynamics Elite Series Fog Lamps 3000K Yellow (Pair) Ford Bronco 2021-2022, and Diode Dynamics Stage Series Fog Pocket Kit Yellow Max Ford Bronco 2021-2022. The Elite Series fog lights have CAD-designed brackets which allow you to mount two SS3 LED Pods and four SSC2 LED pods in the factory bumper openings. With the included harnesses, you’ll be able to switch between road-legal fog lights and offroad lights with ease using your factory aux switch bank. These fog lights have been proven to be reliable, and have been extensively tested for long-term operation from 40 to 185 degrees F.

Features:

• Bolt-on fitment for 2021+ Ford Bronco with steel bumper.
• Adds SAE-compliant fog lights, and powerful offroad lighting.
• Harnesses included independent control of road-legal and off-road lighting.
• The Backlight feature provides amber accent light.
• Highly durable powder-coated stainless steel bracket.
• Engineered and assembled in the USA.

CLICK HERE to buy the Diode Dynamics Elite Series Fog Lamps 3000K Yellow (Pair) Ford Bronco 2021-2022

To buy the Diode Dynamics Stage Series Fog Pocket Kit Yellow Max Ford Bronco 2021-2022 – CLICK HERE

6. Rough Country Triple LED Fog Light Kit Black Series w/Amber DRL Ford Bronco 2021-2022

Available for an affordable price of $299.95, this fog light will add some serious lighting power to your Bronco. This handy kit lets you fit an impressive three sets of Rough Country’s 2-in cube lights on your factory steel bumper, increasing your lighting power and visibility during nighttime adventures. Each light contains six 3-watt high-intensity Cree LEDs, providing a brighter, more focused beam of light that will help you navigate any terrain with confidence. These fog lights are made to last, and are IP67 waterproof and able to withstand the harshest conditions you can throw at them, from the mud and dirt of off-road trails to the concrete and asphalt of the city streets!

Features:

• Light Series: Black Series w/Amber DRL
• Easy installation.
• No cutting or drilling is required.
• Installs discretely into the factory modular bumper.
• Mounting brackets are hidden from view.
• Looks like factory equipment.
• Mounts to factory fog light location.
• Durable black carbon powder coating.
• Includes Limited Lifetime Replacement Guarantee.
• 10,800 lumens.
• (Combined) 120 watts.
• (Combined) 30-degree spot beam.
• IP67 Waterproof rating.
• Durable die-cast aluminum housing.
• Each light contains 4, 5-watt high-intensity Cree LEDs.
• 3-year Manufacturer’s Warranty.

Note:

• Always use fog lights responsibly and follow local traffic laws and regulations regarding their usage.

At Vivid Racing we love to provide you with products that will help you enjoy your adventures and be safe, so if you have any questions or you would love to buy fog lights, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

There is a saying that too much of anything is bad, and this rings true when it comes to how heat affects your engine. As much as heat contributes positively to your car’s performance and function, excessive heat causes drastic changes to the efficiency and performance of one’s vehicle. The right amount of heat is essential to the proper functioning of an internal combustion engine, in cold weather it assists in the ignition process, and it can also improve the engine’s thermal efficiency, and all these contribute positively to the car’s performance. However excessive heat leads to

• Engine Overheating – which is detrimental to performance, causes a reduction in power, and also may cause damage to the components by expansion.
• Reduced Power Output – excessive heat causes a decrease in power output because the engine management system may intervene to protect the engine from damage by limiting performance
• Knocking – also known as pre-ignition, is when the air-fuel mixture ignites prematurely due to excessive heat and pressure in the combustion chamber which may damage the engine and reduce performance
• Lubrication Issues: Excess heat can degrade engine oil and reduce its ability to lubricate effectively, which leads to increased friction and wear on engine components, and the creation of sludge, which in turn affects the engine’s performance and may cause damage in the long term.

Why You Need Water/Methanol Kit and Intercooler Upgrade

Before we mention their differences, water/methanol injection kits and intercoolers are ways used to cool one’s engine, as maintaining the engine’s optimal operating temperature prevents overheating, protects the engine’s parts, maintains the engine’s efficiency, prevents knocking, and improves the engine’s performance. Cooling an engine can also reduce harmful emissions as the right temperature ensures efficient combustion of fuel and air hence reducing the formation of harmful emissions.

Water/Methanol Kit

A Water/Methanol Injection (WMI) kit injects a mixture of water and methanol into the intake air stream or directly into the combustion chamber to improve the performance, efficiency, and reliability of turbocharged, and supercharged engines. If you would like to use the injection method to cool your engine, you should know that it is important to tune your engine to reap the full rewards. Apart from that, this cooling method is preferred by many enthusiasts for several reasons including;

• Its cleaning effect
• Cooling the engine
• Prevention of engine knock
• Reduction of harmful emissions due to complete combustion
• Increased boost pressure
• Advancing ignition timing

Another advantage to this method is the boosting of octane, due to the injection of methanol, which has a higher octane rating resulting in more aggressive timing, and enhanced performance. If you are wondering whether you should upgrade your water/methanol kit, you should know that this is the best method for high-performance, forced-induction engines that are appropriately tuned. We have water/methanol injection kits from different brands in our shop right now, click the blue button below to choose one that will meet your preferences

Intercooler

An intercooler’s job is to cool down the compressed air before it enters the engine’s intake manifold, hence making it a very crucial component in many turbocharged and supercharged engines. Intercoolers help maintain lower intake air temperatures, which in turn improves combustion efficiency, increases power output, and enhances overall engine reliability and longevity hence maximizing the efficiency and performance of the engine. Intercoolers have the same positive effects that water/methanol injection kits have, and more including;

• Reduction of intake air temperature: By cooling down the compressed air with an intercooler, it becomes denser and contains more oxygen which results in efficient combustion.
• Improving fuel efficiency: Since the engine receives cooler air, it uses less fuel to achieve the same power output
• Extending engine life and increasing power output

If you are wondering whether you should upgrade your intercooler, you should know that you need to upgrade to an aftermarket intercooler that can handle higher heat loads if you’re seeking increased power output, better cooling performance, and engine reliability. This upgrade will also benefit you if you have made significant performance modifications to your engine, you have track days, drive-in hot climates, or if use your ride to tow heavy materials. We have intercoolers from different brands in our shop to make sure that you have ample options to choose from so click the blue button to check them out.

Even though we have covered many angles regarding water/methanol injection kits and intercoolers, if you still have any questions or you would love to buy products that improve your ride’s performance and gets the most power out of it, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

We know that the first thing car enthusiasts think about after they buy their rides is how to personify them with mods, and with the release of the 2022 Subaru WRX, your interests have been revived, and so is your thirst to modify this latest release. This sporty sedan is refined and comes with a more powerful 2.4-liter flat-four engine. The ride is set apart with its 271 horsepower and 258 pound-feet of torque, on top of it having outstanding handling capabilities, a distinctive exterior, and a modern feature design meant to make you enjoy your ride. If you are really thinking about setting yourself apart from the rest with upgrades fitting for the 2022 Subaru WRX,  here are the 10 modifications we recommend you go for;

1. Tires

Let’s start off with a tire upgrade for enhanced traction, and to give your ride that visual customization to your liking. Tire modifications can give you that high load-carrying capacity, and ride comfort which will bring out the best out of your 2022 Subaru WRX which is already designed for thrills. We recommend the Michelin Pilot Sport A/S 4, which is the most popular upgrade for the 2022 Subaru WRX, which is guaranteed to give you superior performance on the track and on the street. The Michelin Pilot Sport A/S 4 is available in our shop for an affordable price of $354.99, but if you need more options, click the blue link below to choose tires from different brands that we have in our shop

2. F1 Rear Brake Light | Rain Light

For rear brake lights, we recommend some from SMY Performance, which is a company with a decade long experience in manufacturing, on top of it being founded by a Subaru enthusiast. Their rear brake light comes with 6 red LEDs and a Red trapezoid light bar that is the daytime running light function. The 6 LEDs in the center are both a hyper flashing F1 style brake light or a solid brake light and these modes can be switched from the driver seat using the brake pedal and headlight switch toggle.

Features:

• 100% Fully Plug Play no slicing required
• Center 6 LEDs if the F1 hyper flashing light. 15 blinks each time the brake pedal is pressed
• DRL Function. The Red light bar IOI lights up red when your marker lights are engaged (first click on headlight stalk)
• 2 Modes easily switched from driver seat (NEW 1st to market)
• Wire Loom
• High End plugs to make installation a breeze

Kit Includes:

• 1 x Rear Brake Light
• OEM Subaru Mounting Bracket
• Mounting Hardware
• PNP harness
• Installation Instructions

3. Cold Air Intake

Even though the 2022 Subaru WRX has impressive powers, it doesn’t hurt to get more gains. A cold air intake adds positively to the ride’s performance, and throttle response, and for this, we recommend the Burger Motorsports BMS Performance Intake Subaru WRX 2022+ which is the most popular cold air intake for most 2022 Subaru WRX owners. Available for $399, this air intake system will unlock up to 30+ horsepower to the wheels, improve turbo spool speed, look great under the hood, and will sound the way a turbo car should sound.

Features:

• Adds up to 30+ Horsepower
• Dramatic sound improvement
• Super fast installation and removal
• Improves throttle response
• Huge 3″ Intake Tube
• Retains OE cold air ducting
• Looks great under the hood
• Cleanable and reusable filter
• Filters available in red or blue oil
• Made in the USA

Kit Includes:

• (1) 3″ inverted cone BMS_365 performance air filter w/clamp
• (1) 2 piece anodized aluminum heat shield
• (2) M6x1.0x12mm heat shield screws
• (1) 3″ aluminum intake pipe
• (1) 3″ straight silicone coupler
• (2) 3″ clamps
• (2) M4x.70×12 Phillips MAF screws

If you prefer to have more options to choose from, click the blue link below to choose cold air intakes from different brands that we have in our shop

4. Lowering Springs

We recommend lowering springs for 2022 Subaru WRX owners because we know that lowering your ride gives it that more aggressive stance and improved handling characteristics, and who wouldn’t like that? We recommend the RS-R Down SUS Springs Subaru WRX 2022+, for a more reduced aerodynamic lift, and also get improved aesthetics from your ride. These $279 springs provide a mild drop (Front -15mm to -20mm (-0.6in to -0.8in)) and
(Rear -25mm to -30mm (-1.0in to -1.2in)) and improved handling for drivers who are looking to lessen the fender-to-wheel gap. When it comes to these lowering springs, RS-R took into consideration the factory suspension geometry, shock dampening, spring rate, and ride height levels to ensure that you are getting springs made for your car both for performance and for comfort.

Spring Rate

• Front 3.55kg/mm
• Rear 4.28g/mm

Click the blue link below to choose lowering springs from different brands that we have in our shop

5. Catback Exhaust

You might have noticed that the 2022 Subaru WRX is quieter than the models before it, this is why we recommend an exhaust upgrade for you to get that aggressive sound your ride should have had in the first place. The most popular option for owners of this model is the AWE Catback Exhaust system for Subaru WRX 2022. In addition to the improvement in the sound, this exhaust will increase horsepower, and torque, improve the driving experience, and also produce strong mid to top-end power gains. Touring (the sophisticated edition) and track (the rowdy) editions are available, plus AWE’s conversion kits, which make it easy for you to convert from a Track Edition to a Touring Edition, or vice versa, if you decide to turn the sound up or down. Click the blue button below to choose the one you prefer

6. Carbon Fiber Wing Spoiler

For aesthetics, improved handling, and to improve your 2022 Subaru WRX’s aerodynamics and performance, you need the APR Performance Carbon Fiber 61″ GTC-300 Subaru WRX 2015-2022. This $1,809.65 carbon fiber wing spoiler is composed of lightweight and durable carbon fiber reinforced polymer (CFRP) composite materials. Guaranteed to give you outstanding track performance, this upgrade wil give your 2022 Subaru WRX a unique customization that will truly set you apart.

Features:

• Spanning 61 inches & Height of 13 inches.
• Aerodynamic 3D designed airfoil shape
• Reduce Drag
• Computational Fluid Dynamics (CFD) Analyzed
• Black Powder Coated 10mm “aircraft grade” 6061 billet aluminum pedestals Airfoils support

7. Coilovers

Coilovers are the perfect modifications for rides like the 2022 Subaru WRX that excel on the road and on the track. For this ride, we recommend the BC Racing BR Series Coilover Kit Subaru WRX 2022-2023 which is available for $1,245. The BC Racing BR Series offers the most affordable entry into coilover suspension without sacrificing performance, comfort, build quality, vehicle height, or handling. BC Racing offers one of the widest ranges of damping adjustment with 30 clicks of compression/rebound adjusted simultaneously on the BR Series. With meticulously chosen spring rates, damper valving, and one of the widest adjustment ranges in the industry, it is not a surprise that this is the most popular coilover for 2022 Subaru WRX owners.

Features:

• Highly Customizable
• Mono-Tube Shock Design
• Linear Piston And Damping Curve
• Height Adjustment Independent Of Spring Compression
• 30-Clicks Of Simultaneous Compression/Rebound Adjustment
• Front Camber Plates Standard On Applicable Kits
• Rear Camber Plates Available For Applicable Kits
• Custom Spring Rates And Swift Springs Available
• Custom Valving Or Valving Paired For Custom Spring Rates
• 1-Year Warranty Against Manufacturers Defect
• Fully Rebuildable

For more coilover options, click the blue button

8. Mud Flaps

You need mud flaps for your 2022 Subaru WRX, as they are designed to withstand the toughest road conditions and keep your WRX looking great. The AMS Performance Mud Flaps Subaru WRX 2022+, are now available in our shop for $189.95. the AMS Mud Flaps are the ultimate solution to protect your ride from road debris and paint damage. These mud flaps are stylishly looking and are specifically designed to fit into the OEM bolt holes, which means no cutting, trimming, or drilling is required for installation.

Features:

• Reduces dings, dents, rock chips, and other paint damage from road debris
• Constructed of matte finish abs plastic
• Dark grey color matches OEM fenders perfectly
• Laser cut 6061 aluminum AMS logo
• Mounts in OEM bolt holes with no cutting, trimming, or drilling required

Click the blue button to buy other options

9. Tow Hook

Whether you are taking your 2022 Subaru WRX on track days or you just encounter a car emergency on the road, you will need a tow hook. We recommend the Mishimoto Tow Hook for your Subaru which are available in different colors for you to choose from. These tow hooks are designed with both function and style in mind, and constructed from high-strength 7075 aluminum and 304 stainless steel. Available in 6 vibrant color options, and powder-coated for maximum durability, we guarantee that there is an option to match your style.

Features:

• Direct fit for 2022+ Subaru WRX
• Constructed from high-strength 7075 aluminum and 304 stainless steel
• 8,000-pound straight-pull strength rating
• Designed to meet or exceed SCCA, NASA, CCA, and most racing series regulations
• Fold-down ring with 2-inch/51mm inside-diameter
• Available in Black, Blue, Gold, Neon Yellow, Polished, and Red
• Powdercoated for maximum durability and corrosion resistance
• Includes tow hook location arrow stickers
• Easy to install with no cutting, welding, or drilling required
• Mounts in place of factory front tow hook
• Mishimoto Lifetime Warranty

Kit Includes:

• (1) Mishimoto Racing Tow Hook
• Drilling Template
• Tow Hook Location Arrow Stickers
• Mishimoto Lifetime Warranty

For more tow hook options for you to choose from, click the blue button

 10. Floor Mats

The last, but definitely not the least upgrade we have in store for you is the floor mats. The 2022 Subaru WRX’s interior is splendid, so you will need to protect your vehicle from dirt, debris, and other harmful elements that can cause damage to the carpet and upholstery. For this, we recommend the F1Mats Double Layer Floor Mats which are designed to be durable and long-lasting, and they come in a variety of colors to match the car’s interior. These floor mats are easy to install and can be cleaned easily with a damp cloth or a vacuum cleaner. In addition to that these floor mats are designed to fit your 2022 Subaru WRX perfectly, ensuring maximum protection and a clean, polished look.

Features:

• Perfect Cut For A Safe Drive
• 100% Foot Coverage
• Center Console Side Coverage
• Side Protect Technology
• Unique Transmission Tunnel Coverage
• Under-Seat Cover
• Extra Durable Heat Support
• High-Quality Leather

With this blog we have covered modifications that will improve your ride’s peformance, protect your ride, and improve aesthetics and performance. We think we have covered the basics, but to us the customer is king, and we strive to meet your needs in the best possible way. So if you have any questions or you would love to buy more 2022 Subaru WRX upgrades, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

Ramp up your Chevrolet Corvette Z06’s engine power with an additional 76 extra horsepower by installing the Magnuson Magnum Di TVS2650R Supercharger w/ Fit Kit (No Calibration) Chevrolet Corvette Z06 LT4 14-19. Made by Magnuson Supercharger, a brand famously known for its high-performing superchargers made from the highest quality components, the Magnum DI TVS2650R upgrade for Chevrolet Corvette Z06 with the LT4 engine is designed to replace the factory supercharger or previously installed TVS2300 upgrade system and it is guaranteed to take your engine to the next level.

The system has been designed to fit perfectly under the hood of a stock C7 Z06, and apart from power additions, this system provides a solution to your engine’s cooling needs as it comes with two massive charge air coolers for maximum cooling capability. The Corvette Magnum System will give your engine an incredible 76 extra horsepower: 726 hp and 690 ft-lbs at the crank, without needing any modification for installation. The kit includes everything you will need to supercharge your Corvette, up to the detailed step-by-step installation instructions. The kit is available in our shop for $7,295, click on the blue button below to buy it now and to say hello to the highest efficiency positive displacement supercharger available in the market.

Features:

• 726 hp and 690 ft-lbs at 13 lbs of boost.
• Magnuson TVS2650 Supercharger System designed to mount to GM LT4 heads with OEM look, fit, and finish.
• Utilizes Eaton TVS Technology incorporating high helix, four-lobe rotors for maximum supercharger efficiency across the entire speed range.
• Utilizes patented Dynamic Flow Tuning (DFT) inlet porting.
• Designed to fit under the hood of LT4 vehicles (slight modification may be required for Corvette model with pulley sizes larger than 70mm.
• Bolt-on anodized billet cartridge-style front drive allows for future belt line upgrades.
• High flow dual charge air cooler set-up with ¾” water inlet and outlet ports reduce coolant restriction, allowing maximum flow with extremely high cooling efficiency.
• CNC-machined ports for optimized airflow into engine cylinders.
• 30% increase in airflow over TVS2300 systems
• Vacuum bypass system with instantaneous boost response designed to unload supercharger at engine idle and part-throttle for improved fuel economy. Intercooled bypass air is recirculated through the supercharger for rapid cooldown and ultimate performance.
• Proven maintenance-free supercharger technology. No added complexity of external supercharger oil coolers/heaters for extreme climates.
• Includes handheld tuner device, calibration, and detailed step-by-step instructions for a seamless installation experience.
• Standard 3-year/36,000-mile limited Supercharger System Warranty. An additional 3-year/36,000-mile limited Powertrain warranty may apply.

Fitment:

• Chevrolet Corvette Z06 LT4 Engines 14-19

Magnuson, a brand famously known for manufacturing dependable, and high-performing superchargers that car enthusiasts swear by, is proud to announce that their Supercharger System for Toyota 4Runner is now 50-state legal. The highly efficient TVS1320 Supercharger is the perfect choice for your 2020-2023 Toyota 4Runner 4.0L V6, and it comes complete with calibration. This system helps you to experience your ride at its peak power and performance as it produces over 335 hp and 345 lb-ft of serious torque at the crank we are talking 30% more horsepower and an additional 28% more torque than stock.

This quick and easy-to-install, bolt-on kit is available in our shop for the price of $7,395. This kit includes everything you need from the hardware to the Magnuson calibration for the ECU. Magnuson designed this system to be the perfect match for your 4Runner’s 4.0L V6 engine meaning your daily commute, overlanding treks, and off-road adventures will never be the same. With this system, you will give your V6 system the power of  V8.

The Supercharger System for the 2020-2023 Toyota 4Runner is maintenance-free- pre-filled and sealed, with nothing to check or top off for the lifetime of the engine. Just like we mentioned before, there is no cutting or welding needed for its installation. In addition to the system being legal in 50 states, Magnuson used the highest quality components to manufacture this system, so you won’t have to worry about its durability or performance.

Features:

• Large capacity, fully integrated front inlet/front-drive TVS1320 Supercharger assembly
• 30% HP & 28% ft-lbs increase at the crank on stock
• Positive displacement Roots-type design using Eaton TVS Technology with proven OEM durability
• Integrated vacuum bypass for instant boost response at low engine speeds
• High-efficiency intercooler system for maximum charge air cooling and sustainable performance
• Custom-engineered supercharger belt-drive system for worry-free driving both on and off-road
• Full bolt-on installation with OEM look, fit, and finish
• Proven maintenance-free supercharger technology. No added complexity of external supercharger oil coolers/heaters for extreme climates.
• 3-year/36,000-mile Supercharger Warranty
• Includes detailed installation manual, handheld tuning device, and calibration file.
• CARB EO# D-488-60 | 50 State Legal

Fitment:

• 2020-2023 Toyota 4Runner with 4.0L V6

If you would love to buy a Magnuson Supercharger for your Toyota 4Runner | FJ Cruiser 4.0L V6 10-19 – CLICK HERE 

Armytrix just made it easier for you to feel and hear Honda Civic Type-R FL5’s power with their recently released valvetronic exhaust system. The brand is famously known for top-of-the-industry valved exhaust systems, and their latest exhaust will turn your FL5 Type-R into a loud and powerful weapon on the road. This exhaust will set you apart on the road with its deep resonant sporty sound; in addition to that, you are guaranteed an increase in power, especially in the low and mid rev range, performance gain, and a reduction in weight.

The other thing that makes this exhaust system the best choice for your Honda is that the four sporty chrome polished silver tailpipes pair so well with the smooth look of your Civic Type-R FL5. Plus, their effect on the sound is so significant while, at the same time, they are capable of neutralizing the annoying frequencies in the most critical rpm range.

There are features that make ARMYTRIX exhaust systems different from other brands’ exhaust systems; the top one is their unique “Throttle Pedal Sensor and Engine RPM Signal Auto Functions”. Through this system, ARMYTRIX offers car owners control and a better launch-start without losing backpressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase airflow for better performance (hp & torque gained) and sound.

Feature:

• Main pipe diameter: 2.75″
• Tips: Dual 4″ + Center 4.5″
• Exclusive System Features a Catalytic Converter & OPF Related Fault Code Clearing Mechanism
• Reduces Chances of Check Engine Light (Full System Only)
• Direct Bolt-On
• Integrates with OE Valve System – Enjoy Valvetronic Control Directly from Your Car

Kit Includes:

• Front Pipe
• Mid-Pipes
• Valvetronic Muffler
• Triple Chrome Silver Tips

Fitment:

• Civic Type R FL5 2022-Present K20C1 2.0L Turbo

You can buy the ARMYTRIX Stainless Steel Valvetronic Exhaust System w/Triple Tips Honda Civic Type-R FL5 2.0L Turbo 2022+ by CLICKING HERE

CLICK HERE to buy the ARMYTRIX High-Flow Performance Race Pipe w/Cat-Simulator Honda Civic Type-R FL5 2.0L Turbo 2022+

CLICK HERE to buy the ARMYTRIX Ceramic Coated High-Flow Performance Race Pipe w/Cat-Simulator Honda Civic Type-R FL5 2.0L Turbo 2022+

You can buy the ARMYTRIX Sport Cat Downpipe w/200 CPSI Catalytic Converter Honda Civic Type-R FL5 2.0L Turbo 2022+ by CLICKING HERE

CLICK HERE to buy the ARMYTRIX Ceramic Coated Sport Cat Downpipe w/200 CPSI Catalytic Converter Honda Civic Type-R FL5 2.0L Turbo 2022+

Note:

• Fit to both Left-Hand Drive/Right-Hand Drive cars
• Full system with sports cat down-pipe recommended for optimal results

Media:

So you’re in the market for a set of Rays wheels… The good news is, you have a refined sense of style. There is no denying Rays manufactures some of the best-looking wheels in the industry. From Volk Racing to Gramlights, these people know what they’re doing. Bad news, for the majority of us at least, this purchase will put a large dent in the budget. Is it worth it? Well, today, we are going to dive into what goes into creating what might be the most sought-after wheels in automotive history and is it enough to sell you on investing in what might be the world’s greatest wheels?

World-class quality, outstanding strength, and eye-catching beauty are some of the few words one can use to describe Rays Wheels, and even then one is still short of words. Rays Engineering is a Japanese brand known for manufacturing original forged wheels, their use of the latest technology helps them produce lightweight wheels that don’t compromise on strength. The company has several wheel brands such as Volk Racing, Homura, Team Daytona, Versus, Gram Lights, and more designed to meet all car enthusiasts’ needs.

When it comes to manufacturing these wheels, Rays uses advanced technology, and expertise to bring you wheels that are stronger (for your safety and security on the road), lighter (as it increases driving pleasure), and beautiful. The brand uses original manufacturing methods and quality materials to create the ultimate in forged aluminum wheels. If you are wondering about the materials used and the manufacturing process, this article is about to answer all of your raging questions. When it comes to manufacturing their word class wheels, Rays starts with;

• Selection of Material – Rays wheels are made using Aluminum 6061 alloy. Before forging the billets, they are first heated to over 500 degrees Celsius to ensure strength and enable the material to be shaped into different designs.
• Modeling Forging Process – In this process, Rays engineers shape the heated Billet material using molded form forging dies. This process happens in three stages, the first stage is when the Billet material is made into a pancake shape with a diameter close to that of the finished wheel, during this process, a ton of pressure is applied. The second stage is a step-by-step mold forging from the pancake shape to help it achieve the lightweight spokes and the cross-sectional shape. The second stage is where the center of the spokes is hollowed out. The final forging process brings out the overall shape of the wheel as the hollowed-out portions formed in the second forging are transformed into u-shaped cross-sections characteristic of thin-walled. The final stage is what helps these wheels to achieve the desired rigidity, strength, and lightness.
• Forming the Final Detailed Shape – By using their in-house technology, proprietary dies, and machine, they heat the wheel to form the final detailed shape and simultaneously form the outer and inner rim.
• Heat Treatment – After forging and rim forming, the wheel is heat treated to maximize its unique properties such as tensile strength.

After these processes, there’s mounting processing, where the outside and inside of the wheel are machined to achieve a precise balance, then there’s PCD drilling, a process that requires very high precision, there’s edge trimming, knurling which is a process that improves wheel performance on race cars as it helps prevent slipping between the tire and the wheel that might occur due to repeated sudden acceleration and deceleration, and there’s a painting process which is a vital process that improves wheel’s corrosion resistance.

Before they hit the market Rays Wheels are put through tests, and inspection for defects. Some of the rigorous tests they go through include load fatigue tests, fatigue durability, and more to ensure that the wheels add comfort, and improve driving performance. The basis of Rays Engineering is to manufacture ideal wheels that are strong and lightweight with beautiful designs. The final stage of manufacturing Rays Wheels is polishing and powder coating. The wheel surfaces are carefully polished by hand to remove the lubricant applied during mold form forging as well as galling marks from hot forging so as to ensure a beautiful finish for subsequent decorative painting. Powder coating is important as its thickness enhances anti-corrosion performance.

If TE37s are what you’re after; check out this video. Get some deep insight into the history and what is the difference between all of the different TE37 models.

When it comes to wheel manufacturing, Rays Engineering has reached new heights in wheel design as most of their forged wheel manufacturing processes are performed by machines except for the final inspection which is done by their engineers. At the end of the process, the engineers put certification stickers on the wheels to show that they have passed the rigorous tests and met the standards. Rays Engineering manufactures its wheels in such a way that they meet very high standards, and we at Vivid Racing are proud to be their largest stocking dealers in North America.

Click Here to Buy Their Products in Our Shop

We are happy to announce that Vivid Racing is now a proud distributor of RTR Vehicles’ products. RTR Vehicles was founded by Vaughn Gittin Jr., a professional race car driver and enthusiast, in 2009. The brand’s roots can be traced to Gittin Jr.’s passion for drifting and motorsports. He aimed to create a line of vehicles and parts that would not only excel on the racetrack but also deliver an exciting driving experience for enthusiasts on the streets. Today, RTR Vehicles is more than an aftermarket products manufacturer, the brand prides itself on being an OEM+ performance vehicles company that caters to a special kind of car and truck enthusiasts who want a little more for their vehicles.

RTR’s first notable project was the RTR Ford Mustang, introduced in 2010. This collaboration with Ford Performance brought forth a specially designed and modified version of the iconic Mustang, catering to drift enthusiasts and performance seekers. The Mustang RTR quickly gained popularity, and the brand’s reputation grew as a provider of high quality performance parts.

RTR is raved about by Ford owners for several reasons, for starters the brand has been designing and delivering vehicles to the highest OEM standards for over 10 years. RTR Vehicles is known for developing a range of OEM+ aftermarket components designed to enhance the performance, handling, and aesthetics of Ford vehicles. These parts are engineered with precision to ensure seamless integration and improved performance while maintaining the reliability and drivability of the Ford vehicles. On top of that, their vehicles have that personalized touch that makes one’s ride stand out like no other. Some of the OEM+ parts they develop include suspension upgrades, exhaust systems, grille/body kit upgrades, lighting, wheels, and various interior accessories.

RTR’s commitment to providing well-engineered, quality parts has solidified its position as a trusted name in the aftermarket automotive industry, attracting a loyal customer base of performance enthusiasts and Ford owners. Now you can see why we are very excited to have their products in our shop, we have brought the best products for your Ford models close to home so that you too can personalize your ride into greatness. Our shop has RTR wheels, skid plates, floor liners, LED lights, and more products that will upgrade your ride’s look and performance. Click the links below to choose different upgrades that we have for your Ford model!

• Click Here to Shop RTR Mustang products

• Click Here to Shop RTR Bronco products

• Click Here to Shop RTR Ranger products

• Click Here to Shop RTR F-150 products 

Trucks often come from the factory with the rear end sitting slightly higher than the front; not a very appealing look… This is why a leveling kit is one of the most popular mods for truck owners. Leveling kits raise the front of a truck to make it level with the rear, which improves the truck’s aesthetic, and ground clearance for off-road adventures and makes it easier to fit larger tires. Before we dive into the juicy stuff, let’s get a few things straight; leveling kits aren’t always spacers, it may be a full suspension kit, that will level your Tacoma’s ride height. We like to categorize leveling kits into 3 different tiers: Budget, Mid-Range, and High-Performance. If you own a Toyota Tacoma and are looking for leveling kits, we have some of the best recommendations for you to choose from, keep reading to know more about your leveling kits options for the 3rd generation trucks

1. Camburg BJ UCA Fox 2.5 Factory Dsc Kit Toyota Tacoma Pre/4wd 2005-2022

Made by Camburg Engineering, a company with more than a decade long experience in manufacturing and designing off-road suspension systems, this leveling kit is the ultimate mid-travel kit for your Toyota Tacoma. Apart from lifting your truck, this leveling kit will;

• Improve your ride both on and off-road
• Eliminate weak OEM upper ball-joint
• Increase wheel travel
• Correct suspension geometry

By adding a high-performance leveling kit like this to your taco, you’re equipping it for the most extreme of driving conditions. The driving feel will be noticeably different and much more compliant. The Fox 2.5 DSC coilovers paired with the Camburg Upper Control Arms (UCAs) will assure your suspension kinematics are not only effective but reliable. Upgraded UCAs eliminate restrictive limitations to the suspension travel that comes with stock UCAs.

Features:

• ’05-15 models will see 2-3″ of front lift and ’16-22 models will see 1-2″ of front lift
• Improved ride both on and off-road
• Eliminates weak OEM upper ball-joint
• Increased wheel travel
• Corrected suspension geometry
• Made in the USA

Kit Includes:

• FOX Factory 2.5 DSC Remote Coilovers (880-06-418)
• Camburg Upper Arms (Options: Billet CAM-310184 | Uniball w/ Covers CAM-310130 | Uniball CAM-310036
• | X-joint CAM-310078)
• FOX Factory 2.5 DSC Remote Rear Shocks (883-26-007)

2. Camburg BJ UCA King 3.0 Performance Kit Toyota Tacoma Pre/4wd 2005-2022

This leveling kit by Camburg, has similar impact to the first one we covered, their only difference is that this one utilizes Kings’s larger 3.0 series front coilovers with compression adjusters. This combination of parts not only improves the ride and handling on-road but more so off-road with the larger diameter shocks and external reservoirs. With the upper arms, these shocks increase wheel travel and get your taco ready for some full-tilt trail/desert slaying.

Kit Includes:

• King 3.0 Remote Coilovers w/ Compression Adj. (33001-209A)
• Camburg Upper Arms (Options: Billet CAM-310184 | Uniball w/ Covers CAM-310130 | Uniball CAM-310036
• | X-joint CAM-310078)
• King 3.0 Bypass Rear Shocks (33001-210)

Features:

• Improved ride both on and off-road
• Eliminates weak upper ball-joint
• Increased wheel travel
• Corrected suspension geometry
• Made in the USA
• Lift: 0-3 in (front)
• Wheel Size: 16-17 in
• Max Backspacing: 4.75 in
• Tire Size: 285/75/16 | 285/70/17

3. ARB Ome Complete Suspension 2 Inch Lift Kit With BP-51 Toyota Tacoma

This kit is guaranteed to bring racing technology to your off-road technology. Starting with the shock absorbers, which feature the patent-pending technology developed to deliver unparallel on and off-road performance. The internal bypass shock absorbers which are bolt-on by the way are tested and designed to provide exceptional ride comfort around town with significant amounts of end-zone damping for exceptional chassis control and handling off-road. The kit was designed to give you:

• Enhanced ride quality and control On & Off-Road.
• Increased load-carrying capacity both rear and front.
• Increased Ride Height & Ground Clearance by 2.5-3″ Inches.

4. Eibach Springs Pro-Truck Coilover Stage 2R (Front Coilovers + Rear Reservoir Shocks ) Toyota Tacoma 2016-2020

We recommend this kit as it has been individually dyno tested for matched performance and reliability. Made by Eibach, a company that has over seven decades of specializing in the design and production of high-performance suspension systems and components, rest assured that this is a tough, well-engineered coilover system that will put up with the repeated abuse of frequent trail driving

Features:

• Rear reservoir (or, “resi”) shocks are paired with the 2.0 front coilovers to create the PRO-TRUCK-LIFT STAGE 2R
• Zinc-coated shock tubes and anodized brackets to protect against corrosion
• 5/8″ hardened, nitrocarburized rods for un-matched materials quality
• Piggy-back-type design for ease of installation improved protection
• Billet aluminum spring seats for strength
• Sturdy 46mm tubing
• Maxima (R) shock oil – because we only select the best
• The Stage 2R system can accommodate up to 1.5″ of lift (depending on application)
• Front: +0-2.5″
• Rear: +0-1.5″

Kit Includes:

• Pair of Front Coilovers + Rear Reservoir Shocks

5. Revtek Tacoma PreRunner 3.0 Inch Front Adjustable Complete Assembled Coil Over Kit with 1.5 Inch Rear Block Lift and Front SPC Adjustable Control Arms For 16-18 Toyota Tacoma and PreRunner 4WD

For an affordable price, you can get the Revtek’s Tacoma PreRunner 3.0 Inch Front Adjustable Complete Assembled Coil Over Kit with 1.5 Inch Rear Block Lift and Front SPC Adjustable Control Arms For 16-18 Toyota Tacoma and PreRunner 4WD. Made by Revtek, a company that specializes in manufacturing high-quality lift kits and suspension systems for off-roaders, this kit will;

• Level your truck for a more aggressive appearance and
• Lift your truck for more clearance and performance

Features:

• 3.0 Inch Front Adjustable Complete Assembled Coil Over Kit with 1.5 Inch Rear Block Lift and Front SPC
• Adjustable Control Arms
• 16-18 Toyota Tacoma and PreRunner 4WD
• Hardware included
• Lifetime Warranty
• Detailed installation instructions

6. Bilstein B8 6112 – Suspension Kit Toyota Front

The Bilstein B8 6112 leveling kits provide more ground clearance, allow for larger tires, and increase wheel travel. These kits consist of (2) 60mm shock absorbers combined with (2) custom-matched cold-wound coil springs and (2) billet aluminum spring seats. The large 60mm digressive piston allows for increased damping control for optimal on-road and off-road capabilities. Bilstein used its decades-long of experience to manufacture the best leveling kit for off-road enthusiasts, with benefits like;

• Adjustable spring seat which allows vehicle leveling, and increased ground clearance.
• increased oil capacity, cooling, and long-term durability thanks to the large 60 mm tubing design.
• Bigger piston for improved ride comfort and control over any rough terrain.

Features

• Spring Seat Included: Yes
• Title: Bilstein Shock Absorbers
• Internal Design: Monotube
• Reservoir: No
• California Proposition 65: WARNING: Cancer & Reproductive Harm – www.P65Warnings.ca.gov
• Finish: Dampers: Zinc Plated/Springs: Black
• Boot Included: No
• Body Diameter (ID): 60mm
• Series: B8 6112
• Body Design: Snap Ring Grooved Body (Coilover)

7. aFe Control 2″ Leveling Kit Toyota Tacoma V6 2003-2021

We wouldn’t be recommending the best leveling kits, if we didn’t recommend a product from aFe. With over a decade long of experience, aFe is known for the quality of the products they make. aFe Control Leveling Kits are made of 6061 billet aluminum and provide a 2.0-inch lift in the front to provide better off-road performance while also eliminating the “nose-down rake” notorious on stock trucks. Apart from leveling your ride, this kit will also increase your ride’s front-ground clearance

Features:

• 2″ Front Lift
• CNC Machined 6061 Billet Aluminum
• High Strength Hardware
• Red Anodized Finish
• Easy Bolt-On Installation, Requires No Modifications
• Fits all 2005-2021 Toyota Tacoma Models w/ 6 Lugs

Fitment:

• Toyota 4Runner V6 4.0L 2003-2009
• Toyota 4Runner V8 4.7L 2003-2009
• Toyota FJ Cruiser V6 4.0L 2007-2014
• Toyota Tacoma L4 2.7L 2005-2021
• Toyota Tacoma V6 3.5L 2016-2021
• Toyota Tacoma V6 4.0L 2005-2015

Installing a leveling kit is beneficial, to getting a more balanced look on your truck, and apart from off-roading needs, it can be the best modification for improving stability while towing or hauling. If you have any questions about leveling kits, you would love to buy or ensure safety and proper installation, please do not hesitate to contact us. You can reach us by phone at 1-480-966-3040 or via email at sales@vividracing.com.

Both the Land Rover Defender 90 & 110 are known for being comfortable vehicles, with a range of safety features, outstanding design, and impressive on and off-road capabilities. These two vehicles have a lot of similarities, but if you are wondering what the difference between the Defender 90 and 110 is, let me break it down for you. These vehicles’ main differences are the size of the actual vehicle itself, with the 90 having two doors, while the 110 has four. In addition to that, the Land Rover Defender 90 is loved by enthusiasts who prioritize agility, and maneuverability, either when exploring off-road trails or driving in challenging terrain, while the Land Rover Defender 110 is a better choice for family-oriented enthusiasts due to its larger size, and cargo capacity.

Land Rover Defender 90 and Land Rover Defender 110 come with 3 engine options; P300 – 2.0L inline 4 (296hp), P400 – turbocharged inline 6 (395hp), and P525 – Supercharged 5.0L V8 (518hp). For these vehicles, an exhaust upgrade brings out the Land Rover Defender Exhaust sound that you wouldn’t get from the stock system. In addition to sound, aftermarket exhaust upgrades are reliable, and improve your Land Rover Defender’s looks. The QuickSilver Sport System with Sound Architect Valves uses the Sound Architect Module, which can be controlled by your mobile phone via the QuickSilver App. You get different quality sounds by switching the valves open and shutting them, guaranteeing you an amazing experience in both cases. Furthermore, in dynamic driving mode all the pops, crackles, and bangs are present on the up-change and overrun. QuickSilver’s Sound Architect provides you with a choice that gives you the freedom to select the appropriate soundtrack for your car and tailor that sound to suit the moment.

In this blog, we are going to share the best Land Rover Defender Exhaust Upgrades from QuickSilver that will bring out that superior exhaust note from your engine, while improving your car’s performance at the same time. QuickSilver is a brand known for manufacturing the best exhaust systems that boast longevity, and their exhausts are catered toward each vehicle model and application. The QuickSilver system is a plug and play, and there’s no intrusion needed to install the system. The ones listed in this article are made to perfectly fit the Land Rover 90, and Land Rover 110, check them out down below

Features:

• Valve control for the perfect sound.
• Stainless Steel mandrel bent tubing.
• Improved throttle response.
• Fantastic burbles, crackles, and pops on the overrun.
• Civilized to Muscle car in an instant.
• The 4 x straight carbon fiber tailpipes are a huge improvement to the rearview.

QuickSilver Defender Sound Architect OPF-Back Exhaust w/ Carbon Tailpipes Land Rover 90 2021+

Available in our shop for just $4,186.35, this system perfectly fits the Land Rover 90 2021-2022

QuickSilver Defender Sound Architect OPF-Back Exhaust w/ Carbon Tailpipes Land Rover 110 2021+

This system is available in our shop for $4,186.35, and it is the perfect fit for the Land Rover 110 2021-2022

QuickSilver Sport System with Sound Architect Land Rover Defender P400 90 2021+

The QuickSilver Sport System with Sound Architect Land Rover Defender P400 90 2021+ is available in our shop for $3,988.15

Quicksilver Sport System with Sound Architect Land Rover Defender 110 2021

Made to perfectly fit the Land Rover Defender 110 2021, this system is available for $4,204.52

Quicksilver Sport System w/ Land Rover Defender P300 90 Sound Architect 2021

This system fits the Land Rover Defender 90 2021 and is available in our shop for $4,204.52

Quicksilver Sport System w/ Land Rover Defender P300 110 Sound Architect 2021

This system is available in our shop for $4,204.52, and it is a perfect match for Land Rover Defender 110 2021

Quicksilver Sport System with Sound Architect Land Rover Defender V8 90/110 2021+

This system fit the Land Rover Defender V8 90 2021-Up, and Land Rover Defender V8 110 2021-Up, and it is available for $3,491.14

Quicksilver Sport System with Sound Architect Land Rover Defender P400 90/100 2021+

This system perfectly fits the Land Rover Defender P400 90/100 2021-Up, Land Rover Defender D250 2021-Up, and Land Rover Defender D300 90/100 2021-Up, and is available in our shop for $3,515.56

The VR team is back at it again with the 2023 Nissan Z! Earlier this year, we dove head-first into the new RZ34 platform with a Proto spec, Ikazuchi Yellow Z. After tuning, testing wheel fitments, and installing one of the first aftermarket exhausts from Apex’i, we, unfortunately, had a turn of events with that vehicle. We honestly could have abandoned our plans altogether, but the team was truly impressed with the twin-turbo V6 over many other optional platforms.

So here we are!
For our new Nissan Z, we opted for the Performance spec, in Boulder Gray. Yep, drop-dead gorgeous. While we would have LOVED the 6-speed manual, dealer markups crushed those dreams with no remorse. Graphite interior, 9-speed automatic, and Apple CarPlay, the VR team is stoked, to say the least.

Stay tuned for some good times, fun installs, and rad parts. This is the Project – Nissan 23Z series. Subscribe on YouTube

I am selling my 2020 Ford Raptor 3.5L Ecoboost with 600 horsepower! I bought this truck out of the midwest with only 2000 miles on it from 1 owner and have had it for the past 2.5 years. This was used as a Vivid Racing Project Vehicle to showcase products. This truck was not beaten up and off-roaded. It hauled kids, and dirt bikes, and commuted here in Arizona. The truck is fully loaded and in great condition. So many awesome upgrades including; VR Forged 20in 1pc Monoblock Wheels, Toyo Tires MT 37in, Baer Brakes front big brake kit, Rigid bumper light kit, Garrett Turbo upgrade with intercooler and custom VR tune, VR Performance Intake and catback valvetronic exhaust, Hellwig rear sway bar, custom steering wheel, Tuffy under seat storage box and center console box, Icon front leveling spacer, Anderson composites carbon fiber fender vents, fenders, and hood grill, AMP Pedal Booster, BakFlip bed cover, Morimoto headlights with all running lights, Mishimoto oil catch can, Rigid 3 light bumper setup.

The truck has a factory 802a luxury package which includes ALOT of awesome features. 10-way heated and cooled seats, adjustable pedals, Sync system with Apple car play, blind spot detection, trailer tow monitoring, trailer brake controller, and more.

Oil has been changed every 5000 miles. The full front end and hood have a clear bra. No dents, dings, or accidents.

The best part is I am including ALL of the stock parts. Stock wheels/tires, turbos, fenders, brakes, intercooler, intake, and whatever else I have for the right price.

This truck is much faster than a tuned Raptor. 600HP at the crank! However, it only gives you that when you drive it like you want it. Regular driving around is very comfortable and easy. Everything is done safe, reliable, and top-tier.

Tons of videos on our channel from the mods being done – Search for @vividracingcom

The vehicle is registered in Montana but located in Gilbert, AZ. Private Party Sale. The truck is paid for so the Title is available for immediate transfer.

Buyer is responsible for shipping and payment is only accepted via Wire Transfer.

Please contact dan@vividracing.com for all serious inquiries.

Videos of the Raptor Build

Turbo Upgrade

Turbo Upgrade Speed Testing Explained

Best Sounding Raptor Exhaust

Big Brake Install and Test

Morimoto Headlight Update

Carbon Fiber Add ons

Installing a Custom Steering Wheel

Bed Cover, Sway Bar, Lift Kit, and Wheels!

Photos

Please contact dan@vividracing.com for all serious inquiries.

If you are in the market to modify your Porsche 981 Cayman GT4, you’ve opened the right article. This Porsche 981 Cayman GT4 upgrade recommendation is inspired by professional freeride mountain bike rider, Ethan Nell, who is an incredible athlete known for pushing limits and having a timeless style. Not familiar with this legend? Check his Redbull Rampage run below. It doesn’t come as a surprise that he also owns one of the finest Porsches on the market. In typical Freeride fashion, Ethan is evolving his 918 into an aggressive machine that not only sounds but looks the part. The 981 Cayman is described by many enthusiasts as a very outstanding vehicle, the Cayman has features that set it apart from other Porsche models, such as better weight distribution, lightweight chassis, and more. This coupe has 385 horsepower, and it runs at 183 mph, and we have felt and seen the power and speed of this ride when our client Ethan Nell did his recent wheel and exhaust upgrade.

This wheel’s unique design will enhance your car’s handling and braking power, and on top of that give you a visually stunning exterior that will match your car’s finish. The front wheels are 20×8.5 +50mm 5×130, and the rear wheels are 20×11 +60mm 5×130, and you can buy them by clicking the blue button below.

To get the powerful and sporty sound heard in the video above, Ethan’s coupe had an exhaust system modification. Not just any exhaust, ARMYTRIX Super Sport Stainless Steel Exhaust System which is available in our shop for $3,330! This system is guaranteed to increase power, reduce weight, and improve sound. Let’s talk about sound improvement, shall we? This precision-made performance system delivers more power, especially in the low and mid rev range, the effect on the sound is incredibly significant, adding a deep resonant sporty sound, but at the same time neutralizing the annoying frequencies in the most critical rpm range.

ARMYTRIX exhaust systems differ from other brands’ exhaust systems with their unique “Throttle Pedal Sensor and Engine RPM Signal Auto Functions”. Through this system, ARMYTRIX offers car owners a better launch-start without losing backpressure by automatically closing the valves at low rpm. When your car is driving at high speeds, the valves will automatically open to increase airflow for better performance (hp & torque gained) and sound. Made to perfectly fit the Porsche 981 Boxster 2013-2016, and Porsche 981 Cayman 2013-2016, this system delivers incredible race sound and performance gains.

981 Boxster 2013-2016

• Power ( HP): 15.2
• Torque ( Nm): 24.4
• Weight Saving (-Kg): 1.6

981 Cayman 2013-2016

• Power ( HP): 9.5
• Torque ( Nm): 11.3
• Weight Saving (-Kg): 3.6

Features:

• Link Pipe
• Tail Pipe
• Valvetronic Mufflers
• Remote Control Module
• Stainless Steel
• Dual Matte Black Tips
• 3 Mode Valve System to control exhaust sound